INVESTIGATION OF LASER BEAM WELDING PROCESS OF AZ61 MAGNESIUM-BASED ALLOY

查看全文 作　　者：H.Y. Wang Z.J. [1]Li

机构地区：[1]Industrial Center, Shenzhen Polytechnic, Shenzhen 518055, China

出　　处：《Acta Metallurgica Sinica(English Letters)》索引2006年第19卷第4期,共8页

摘　　要：Laser welding process of AZ61 magnesium alloys is investigated using a special CO2 laser experimental system. The effect of processing parameters including laser power, welding speed, and protection gas flow at the top and bottom is researched. The results show that an ideal weld bead can be formed by choosing the processing parameters properly. An optimized parameter range is obtained by a large number of experiments. Among them, laser power and welding speed are the two main parameters that determine the weld width and dimensions. The protect gas flow rate has a slight effect on the weld width, but it directly effects the surface color of the weld. The test results for typical welds indicate that the microhardness and tensile strength of the weld zone are better than that of the base metal. A fine-grained weld region has been observed and no obvious heat-affected zone is found. The weld zone mainly consists of small |á-Mg phase, (|á+ Al12Mg17), and other eutectic phases. The small grains and the eutectic phases in the joint are believed to play an important role in the increase of the strength of welds for AZ61 magnesium alloys. 关键词：镁合金激光焊接激光功率焊接速度

相关文献

参考文献（1）
引证文献（11）
耦合文献（0）

参考文献(1)

引证文献(11)

互联网出版许可证新出网证(渝)字10号全国400电话 - 免长途话费

INVESTIGATION OF LASER BEAM WELDING PROCESS OF AZ61 MAGNESIUM-BASED ALLOY

参考文献(1)

引证文献(11)

用户提示