| 3 | Crystallization and viscosity-temperature characteristics during co-gasification of industrial sludge and coal显示文摘Co-gasification of industrial sludge(IS)and coal was an effective approach to achieve harmless and sustainable utilization of IS.The long-term and stable operation of a co-gasification largely depends on fluidity of coal-ash slag.Herein,the effects of IS addition on the crystallization and viscosity of Shuangmazao(SMZ)coal were investigated by means of high temperature stage coupled with an optical microscope(HTSOM),a scanning electron microscopy coupled with an energy dispersive Xray spectrometry(SEM-EDS),X-ray diffraction(XRD),a Fourier transform infrared spectrometer(FTIR),and FactSage software.The results showed that when the proportion of IS was less than 60%,with the addition of IS,the slag existed in an amorphous form.This was due to the high content of SiO_(2) and Al_(2)O_(3) in SMZ ash and blended ash,which had a high glass-forming ability(GFA).The slag formed at a high temperature had a higher polymerization degree and viscosity,which led to a decrease in the migration ability between ions,and ultimately made the slag difficult to crystallize during the cooling.When the proportion of IS was higher than 60%,the addition of IS increased the CaO and FeO content in the system.As network modifiers,CaO and FeO could provide O^(2−)at a high temperature,which reacted with silicate network structure and continuously destroyed the complexity of network structure,thus reducing the polymerization degree and viscosity of slag.At this time,the migration ability between ions was enhanced,and needle-shaped/rod-shaped crystals were precipitated during the cooling process.Finally,the viscosity calculated by simulation and Einstein-Roscoe empirical formula demonstrated that the addition of IS could significantly improve the fluidity of coal ash and meet the requirements of the liquid slag-tapping gasifier.The purpose of this work was to provide theoretical support for slag flow mechanisms during the gasifier slagging-tapping process and the resource treatment of industrial solid waste. | Linmin ZHANG Bin LIU Juntao WEI Xudong SONG Yonghui BAI Jiaofei WANG Ying ZHOU Huijun YANG Guangsuo YU | 2022 | Frontiers in Energy2022，16，6： | 0 |
| 4 | Physico-chemical structure evolution characteristics of coal char during gasification in the presence of iron-based waste catalyst显示文摘The present study aims to explore the physico-chemical structure evolution characteristic during Yangchangwan bituminous coal(YCW)gasification in the presence of iron-based waste catalyst(IWC).The catalytic gasification reactivity of YCW was measured by thermogravimetric analyzer.Scanning electron microscope–energy dispersive system,nitrogen adsorption analyzer and laser Raman spectroscopy were employed to analyze the char physico-chemical properties.The results show that the optimal IWC loading ratio was 5 wt%at 1000°C.The distribution of IWC on char was uneven and Fe catalyst concentrated on the surface of some chars.The specific surface area of YCW gasified semi-char decreased significantly with the increase of gasification time.i.e.,the specific surface area reduced from 382 m2/g(0 min)to 192 m2/g(3 min),meanwhile,the number of micropores and mesopores decreased sharply at the late gasification stage.The carbon microcrystalline structure of YCW gasified semi-char was gradually destroyed with the increase of gasification time,and the microcrystalline structure with small size was gradually generated,resulting in the decreasing order degree of carbon microcrystalline structure.IWC can catalyze YCW gasification which could provide theoretical guidance for industrial solid waste recycling. | Xinsha Zhang Xudong Song Jiaofei Wang Weiguang Su Bing Zhou Yonghui Bai Guangsuo Yu | 2020 | International Journal of Coal Science & Technology2020，7，3： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员