| 1 | Microstructure and mechanical properties of Al-12Si and Al-3.5Cu-1.5Mg-1Si bimetal fabricated by selective laser melting显示文摘An Al-12 Si/Al-3.5 Cu-1.5 Mg-1 Si bimetal with a good interface was successfully produced by selective laser melting(SLM).The SLM bimetal exhibits four successive zones along the building direction:an Al-12 Si zone,an interfacial zone,a texture-strengthening zone and an Al-Cu-Mg-Si zone.The interfacial zone(<0.2 mm thick)displays an increasing size of the cells composed of eutectic Al-Si and a discontinuous cellular microstructure,resulting in the lowest hardness of the four zones.The texturestrengthening zone(around 0.3 mm thick)shows a remarkable variation of the hardness and<001>fiber texture.Electron backscatter diffraction analysis shows that the grains grow gradually from the interfacial zone to the Al-Cu-Mg-Si zone along the building direction.Additionally,a strong<001>fiber texture develops at the Al-Cu-Mg-Si side of the interfacial zone and disappears gradually along the building direction.The bimetal exhibits a room temperature yield strength of 267±10 MPa and an ultimate tensile strength of 369±15 MPa with elongation of 2.6±0.1%,revealing the potential of selective laser melting in manufacturing dissimilar materials. | P.Wang C.S.Lao Z.W.Chen Y.K.Liu H.Wang H.Wendrock J.Eckert S.Scudino | 2020 | Journal of Materials Science & Technology2020，36，1： | 7 |
| 3 | State-of-the-art survey on digital twin implementations显示文摘Digital twin(DT)has garnered attention in both industry and academia.With advances in big data and internet of things(IoTs)technologies,the infrastructure for DT implementation is becoming more readily available.As an emerging technology,there are both potential and challenges.DT is a promising methodology to leverage the modern data explosion to aid engineers,managers,healthcare experts and politicians in managing production lines,patient health and smart cities by providing a comprehensive and high fidelity monitoring,prognostics and diagnostics tools.New research and surveys into the topic are published regularly,as interest in this technology is high although there is a lack of standardization to the definition of a DT.Due to the large amount of information present in a DT system and the dual cyber and physical nature of a DT,augmented reality(AR)is a suitable technology for data visualization and interaction with DTs.This paper seeks to classify different types of DT implementations that have been reported,highlights some researches that have used AR as data visualization tool in DT,and examines the more recent approaches to solve outstanding challenges in DT and the integration of DT and AR. | Y.K.Liu S.K.Ong A.Y.C.Nee | 2022 | Advances in Manufacturing2022，10，1： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员