|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Frequency Dependent Network Equivalent for Electromagnetic and Electromechanical Hybrid Simulation显示文摘频率相关网络等值(frequency dependent network equivalent,FDNE)不仅可以表示网络的基频响应特性,而且还可以表示网络的高频响应特性,从而能够应对电磁暂态、机电暂态混合仿真中的接口波形畸变问题。基于简化元件模型介绍FDNE的频率特性采样值的求取方法;应用矢量拟合法将上述频率特性采样值整体拟合成一个FDNE,并采用摄动法保证了此FDNE的无源性。最后,用多个算例说明基于FDNE的电磁—机电暂态混合仿真方法的精度及其优势。 | ZHANG Yi WU Wenchuan ZHANG Boming Aniruddha M. Gole | 2012 | 中国电机工程学报2012，32，13： | 15 |
| 2 | Three-dimensional Cure Simulation of Stiffened Thermosetting Composite Panels显示文摘Stiffened thermosetting composite panels were fabricated with co-curing processing.In the co-curing processing,the temperature distribution in the composite panels was nonuniform.An investigation into the threedimensional cure simulation of T-shape stiffened thermosetting composite panels was presented.Flexible tools and locating tools were considered in the cure simulation.Temperature distribution in the composites was predicted as a function of the autoclave temperature history.A nonlinear transient heat transfer finite element model was developed to simulate the curing process of stiffened thermosetting composite panels.And a simulation example was presented to demonstrate the use of the present finite element procedure for analyzing composite curing process.The glass/polyester structure was investigated to provide insight into the nonuniform cure process and the effect of flexible tools and locating tools on temperature distribution.Temperature gradient in the intersection between the skin and the flange was shown to be strongly dependent on the structure of the flexible tools and the thickness of the skin. | Guangquan Yue,Boming Zhang ,Fuhong Dai and Shanyi Du Center for Composite Materials,Harbin Institute of Technology,Harbin 150080,China | 2010 | Journal of Materials Science & Technology2010，26，5： | 13 |
| 3 | Power System State Estimation Solution With Zero Injection Constraints Using Modified Newton Method and Fast Decoupled Method in Polar Coordinate显示文摘如何保证零注入节点的注入功率在状态估计结果中严格为0是电力系统状态估计研究中的重要问题。在直角坐标下,由于零注入约束为线性约束,可使用修正牛顿法来有效地解决这一问题。因此,借鉴直角坐标下修正牛顿法的思路,提出了极坐标下的修正牛顿法和修正快速解耦估计。这些方法的计算流程与传统的极坐标下的牛顿法和快速解耦估计非常相似,计算速度与大权重法相当,同时能够保证零注入约束严格满足。仿真结果验证了所得结论。 | GUO Ye ZHANG Boming WU Wenchuag SUN Hongbin | 2012 | 中国电机工程学报2012，32，22： | 13 |
| 4 | Rule Extraction in Transient Stability Study Using Linear Decision Trees显示文摘为了提高精细规则的性能,提出一种基于支持样本的线性决策树的规则提取方法。该方法筛选临近稳定边界的支持样本,作为决策树的输入样本,精简了样本数目;提出基于线性分类器的决策树方法,以得到基于组合属性的安全稳定运行规则。在单机无穷大系统和IEEE 39节点系统中的对比研究表明:由于考虑了支持样本的特殊性,用线性组合规则代替单属性规则,减少了计算时间,提高了泛化能力,丰富了规则的物理含义,得到的灵敏度信息可用于辅助决策,在安全稳定精细规则提取中具有应用潜力。 | SUN Hongbin WANG Kang ZHANG Boming ZHAO Feng | 2011 | 中国电机工程学报2011，31，34： | 11 |
| 5 | Study of the starting pressure gradient in branching network显示文摘In order to increase the production of oil in low permeability reservoirs with high efficiency,it is necessary to fully understand the properties and special behaviors of the reservoirs and correctly describe the flow in the reservoirs.This paper applies the branching network mode to the study of the starting pressure gradient of nonlinear Newtonian fluid (Bingham fluid) in the reservoirs with low permeability based on the fact that the fractured network may exist in the reservoirs.The proposed model for starting pressure gradient is a function of yield stress,microstructural parameters of the network.The proposed model may have the potential in further exploiting the mechanisms of flow in porous media with fractured network. | LI Yan & YU BoMing School of Physics,Huazhong University of Science and Technology,Wuahn 430074,China | 2010 | Science China(Technological Sciences)2010，53，9： | 7 |
| 6 | Effects of Contact Resistance on Heat Transfer Behaviors of Fibrous Insulation显示文摘本文建立了辐射与传导相耦合的数值传热模型来预报热防护系统用纤维隔热材料的传热行为。利用实验测得的瞬态温度数据(热面最高达1000K),采用蒙特卡洛方法确定了修正后的辐射性质。最后将瞬态热响应的计算结果与实验结果进行了比较。结果表明:接触热阻的存在会显著影响试件的温度分布,对传热模型中忽略接触热阻的情况其平均绝对偏差为3.25%,而对无接触热阻存在的情况平均绝对偏差只有1.82%。 | Zhao Shuyuan Zhang Boming Du Shanyi | 2009 | Chinese Journal of Aeronautics2009，22，5： | 5 |
| 7 | Damping and Mechanical Properties of Cocured Composite Laminates with Embedded Perforate Viscoelastic Layer显示文摘The composite laminates with embedded acrylonitrile butadiene rubber(NBR) layer were fabricated by cocuring process.The embedded layers were perforated with a series of small holes to allow resin to flow through the damping layer and completely couple the structure to improve bending stiffness and interlaminar shearing strength of these cocured composite laminates.The damping,bending stiffness and shearing strength of these composite laminates with different perforation diameters were investigated.The experimental results show that increasing the perforation diameter leads to significant decreases in damping and significant increase in bending stiffness up to an area ratio of 7.065%.The area ratio here is defined as the ratio of perforation area to the total damping area.Beyond the area ratio of 7.065%,increasing the diameter to an area ratio of 50.24% results in only a slight variation in damping and bending stiffness.Moreover,increasing the perforation diameter does not always increase the shearing strength of the embedded viscoelastic layer.The shearing strength of embedded viscoelastic layer increases only when the area ratio is greater than 19.625%;instead,it will decrease. | Lijian Pan Boming Zhang | 2009 | Journal of Materials Science & Technology2009，25，4： | 5 |
| 8 | MOF-derived ZnCo_2O_4/C wrapped on carbon fiber as anode materials for structural lithium-ion batteries显示文摘To meet the requirements for the mechanical and electrochemical performance for carbon fiber-based (CF-based) composites in the structural lithium ion batteries (SLIBs) application, better CF-Based composites are urgently needed. Herein, we report a novel composite metal organic framework (MOF)-derived ZnCo_2 O_4/C@carbon fiber via a facile method and subsequent annealing treatment. In this anode,the nano ZnCo_2 O_4/C coatings wrapped on the surface of CF provide more active sites for electrode reactions and the thin carbon layers give the additional protection. For this material, after 100 cycles, it exhibits excellent cycling stability including high reversible capacity of 463 mAh/g at 50 mA/g, which increases 201% than that of the CF. Thus, this structural anode material exhibits enhanced capacity, high initial columbic efficiency. | Huagen Li Shubin Wang Mengjie Feng Jiping Yang Boming Zhang | 2019 | Chinese Chemical Letters2019，30，2： | 4 |
| 9 | In situ polymerization coating and characteristics of coated NPK compound fertilizer显示文摘Controlled release NPK compound fertilizers were prepared by means of in situ polymerization of monomers on the surface of fertilizer granules at room temperature.Methacrylate,α-methyl acrylic acid,and ethylene dimethylacrylate were used as monomers,Dibenzoyl peroxide as initiator,and cobalt naphthenate,and triethyl amine as promoters.The structures of coating materials were characterized by IR spectra.The thermogravimetric analysis result indicated that the coating materials were of good thermal stability.The mean thickness of single coating measured with screw gauge was ca.140μm.The morphologies of uncoated and coated fertilizer granules analyzed by using scanning electron microscopy were changed from porosities and gullies to hills and plain. The release rate of coated compound fertilizers in water could be controlled by the hydrophicity and thickness of coating.The increase in coating hydrophicity caused the increase in release rate of fertilizer.The increase in thickness of coating slowed the release rate. | WANG Zhenghui ZHU Boming | 2007 | Journal of Northeast Agricultural University(English Edition)2007，14，2： | 4 |
| 10 | A New Method to Track Resin Flow Fronts in Mold Filling Simulation of RTM Process显示文摘A new method to track resin flow fronts, referred to as the topological interpolated method (TIM), which is based on filling states and topological relations of adjacent nodes was proposed. An experiment on the mould filling process was conducted. It was compared with exact solutions and the experimental results, and good agreements were observed. Numerical and experimental comparisons with the conventional contour method were also carried out, and it showed that TIM could enhance the local accuracy of flow front solutions with respect to the contour method when merging flow fronts and resin approaching the mold wall were involved. | Fuhong DAI Shanyi DU Boming ZHANG Dianfu WAN Ceater for Composite Materials, Harbin Institute of Technology,Harbin 150001,China | 2004 | Journal of Materials Science & Technology2004，20，3： | 4 |
| 11 | Simulation and Verification of Machining Deformation for Composite Materials显示文摘Prepreg properties including cure kinetics, cure shrinkage, and coefficient of thermal expansion were analyzed. A simulation method based on 'element birth and death' method of Finite element analysis(FEA) was presented to simulate the cutting process and predict the machining deformation for composite laminates and stiffened panels. The comparisons between the simulation results and experimental data showed good agreement. It is found that residual stresses are the main source of machining deformation for composites and machining deformation is expected to happen only if there are stress gradients along the machining direction. There is no machining deformation for composite laminates due to its uniform stresses distribution in plane, while machining deformation can be observed obviously for T-shape stiffened composite panels. Attention should be paid to machining deformation to avoid the mismatch during assembly. | 刘凯 叶金蕊 TANG Zhanwen LIU Weiping ZHANG Boming | 2014 | Journal of Wuhan University of Technology(Materials Science)2014，29，5： | 3 |
| 12 | Fractal Nature of Capillary and Viscous Fingering in Two-Dimensional Porous Media显示文摘A computer model of capillary and viscous fingering in a porous media is presented,which treats the media as a square lattice connected with randomly chosen radius.The fractal properties of the model are studied for shell-shell aggregation method by Monte Carlo simulation.The simulation results show that the dimension D increases along with increasing of M and decreasing ofμ,where M andμare the ratios of the viscosity of the two fluids and the most probable radius of the throat in porous media respectively.It is found that there exist four regions for fluid. | TIAN Juping YU Boming YAO Kailun | 1995 | Chinese Physics Letters1995，12，12： | 3 |
| 13 | Experimental study on a transpiration cooling thermal protection system显示文摘Transpiration cooling thermal protection systems (TPS) are investigated for potential applications in hypersonic and re-entry vehicles,which are subjected to the severe aerodynamic heating environment. In this paper a transpiration cooling thermal protection system was designed and manufactured,and an experiment platform with radiant heating at the bottom as heat source was developed. The cooling capacity of the transpiration cooling TPS was experimentally investigated. By combining transpiration cooling method with traditional TPS,the heat load capability of the TPS can be improved. The structure temperature with active cooling applied was much lower than that without active cooling applied under the same heat load as well as the heat load increased with active cooling than the one without active cooling for the same structure temperature. The experimental results showed that at 5800 s,the temperature of inner structure was 100°C with active cooling applied compared to 500°C without active cooling applied,then the temperature increased and reached to 360°C at 8300 s. Heat load of this transpiration cooling TPS can be increased by over 70% as compared to the passion one and the cooling capability of the transpiration TPS was about 1700 kJ/kg. The results can provide fundamental data for developing the transpiration cooling TPS. | LIU Shuang & ZHANG BoMing Center for Composite Materials and Structure, Harbin Institute of Technology, Harbin 150080, China | 2010 | Science China(Technological Sciences)2010，53，10： | 3 |
| 14 | A High Dielectric N-Type Small Molecular Acceptor Containing Oligoethyleneglycol Side-Chains for Organic Solar Cellst显示文摘 | Bomee Jang Changyeon Lee Young Woong Lee Donguk Kim Mohammad Afsar Uddin Felix Sunjoo Kim Bumjoon J. Kim Han Young Woo | 2018 | Chinese Journal of Chemistry2018，36，3： | 3 |
| 15 | Near-infrared organic photoelectric materials for lightharvesting systems: Organic photovoltaics and organic photodiodes显示文摘The inherent advantages of organic optoelectronic materials endow lightharvesting systems,including organic photovoltaics(OPVs)and organic photodiodes(OPDs),with multiple advantages,such as low-cost manufacturing,light weight,flexibility,and applicability to large-area fabrication,make them promising competitors with their inorganic counterparts.Among them,nearinfrared(NIR)organic optoelectronic materials occupy a special position and have become the subject of extensive research in both academia and industry.The introduction of NIR materials into OPVs extends the absorption spectrum range,thereby enhancing the photon-harvesting ability of the devices,due to which they have been widely used for the construction of semitransparent solar cells with single-junction or tandem architectures.NIR photodiodes have tremendous potential in industrial,military,and scientific applications,such as remote control of smart electronic devices,chemical/biological sensing,environmental monitoring,optical communication,and so forth.These practical and potential applications have stimulated the development of NIR photoelectric materials,which in turn has given impetus to innovation in light-harvesting systems.In this review,we summarize the common molecular design strategies of NIR photoelectric materials and enumerate their applications in OPVs and OPDs. | Boming Xie Zhongxin Chen Lei Ying Fei Huang Yong Cao | 2020 | InfoMat2020，2，1： | 3 |
| 16 | Multi-objective Optimization of Co-cured Composite Laminates with Embedded Viscoelastic Damping Layer显示文摘Presented herein is a methodology for the multi-objective optimization of damping and bending sti-ness of co-coured composite laminates with embedded viscoelastic damping layer.The embedded viscoelastic damping layer is perforated with a series of small holes,and the ratio of the perforation area to the total damping area is the design variable of the methodology.The multi-objective optimization is converted into a single-objective problem by an evaluation function which is a liner weigh sum of the two sub-objective functions.The proposed methodology was carried out to determine the optimal perforation area ratios of two viscoelstic layers with different perforation distance embedded in two composite plates.Both the optimal perforation area ratios are approximate to 2.2%.However,the objective value of the plate with greater perforation distance in embedded viscoelatic layer is much greater. | Lijian Pan Boming Zhang Fuhong Dai | 2009 | Journal of Materials Science & Technology2009，25，5： | 2 |
| 17 | A two-level hierarchical discrete-device control method for power networks with integrated wind farms显示文摘Power systems depend on discrete devices, such as shunt capacitors/reactors and on-load tap changers, for their long-term reliability.In transmission systems that contain large wind farms, we must take into account the uncertainties in wind power generation when deciding when to operate these devices.In this paper, we describe a method to schedule the operation of these devices over the course of the following day.These schedules are designed to minimize wind-power generation curtailment, bus voltage violations, and dynamic reactive-power deviations,even under the worst possible conditions.Daily voltagecontrol decisions are initiated every 15 min using a dynamic optimization algorithm that predicts the state of the system over the next 4-hour period.For this, forecasts updated in real-time are employed, because they are more precise than forecasts for the day ahead.Day-ahead schedules are calculated using a two-stage robust mixedinteger optimization algorithm.The proposed control strategies were tested on a Chinese power network with wind power sources; the control performance was also validated numerically. | Fengda XU Qinglai GUO Hongbin SUN Boming ZHANG Lin JIA | 2019 | Journal of Modern Power Systems and Clean Energy2019，7，1： | 2 |
| 18 | Stress transfer around a broken fiber in unidirectional fiber-reinforced composites considering matrix damage evolution and interface slipping显示文摘A shear-lag model is applied to study the stress transfer around a broken fiber within unidirectional fiber-reinforced composites(FRC) subjected to uniaxial tensile loading along the fiber direction.The matrix damage and interfacial debonding,which are the main failure modes,are considered in the model.The maximum stress criterion with the linear damage evolution theory is used for the matrix.The slipping friction stress is considered in the interfacial debonding region using Coulomb friction theory,in which interfacial clamping stress comes from radial residual stress and mismatch of Poisson's ratios of constituents(fiber and matrix).The stress distributions in the fiber and matrix are obtained by the shear-lag theory added with boundary conditions,which includes force continuity and displacement compatibility constraints in the broken and neighboring intact fibers.The result gives axial stress distribution in fibers and shear stress in the interface and compares the theory reasonably well with the measurement by a polarized light microscope.The relation curves between damage,debonding and ineffective region lengths with external strain loading are obtained. | YANG Zhong ZHANG BoMing ZHAO Lin SUN XinYang | 2011 | Science China(Physics,Mechanics & Astronomy)2011，54，2： | 2 |
| 19 | Concentration and chemical composition of PM 2.5 in Shanghai for a 1-year period显示文摘 | Boming Ye Xueli Ji Haizhen Yang Xiaohong Yao Chak K Chan Steven H Cadle Tai Chan Patricia A Mulawa | 2002 | Atmospheric Environment2002，，4： | 2 |
| 20 | Temperature field of thick thermoset composite laminates during cure process显示文摘 | Guo Zhansheng Du Shanyi Zhang Boming | 2005 | Compos Sci Techn2005，65，34： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员