| 1 | Dynamic synchronous motion accuracy measurement and estimation for a five-axis mirror milling system显示文摘A mirror milling system(MMS)comprises two face-to-face five-axis machine tools,one for the cutting spindle and the other for the support tool.Since it is essential to maintain the cutter and support coaxial during the cutting process,synchronous motion accuracy is the key index of the MMS.This paper proposed a novel method for measuring and estimating the synchronous motion accuracy of the dual five-axis machine tools.The method simultaneously detects errors in the tool center point(TCP)and tool axis direction(TAD)during synchronous motion.To implement the suggested method,a measurement device,with five high-precision displacement sensors was developed.A kinematic model was then developed to estimate the synchronous motion accuracy from the displacement sensor output.The screw theory was used to obtain the analytical expression of the inverse kinematic model,and the synchronous motion error was compensated and adjusted based on the inverse kinematic model of the dual five-axis machine tools.TCP and TAD quasi-static errors,such as geometric and backlash errors,were first compensated.By adjusting the servo parameters,the dynamic TCP and TAD errors,such as gain mismatch and reversal spike,were also reduced.The proposed method and device were tested in a large MMS,and the measured quasi-static and dynamic errors were all reduced when the compensation and adjustment method was used.Monte Carlo simulations were also used to estimate the uncertainty of the proposed scheme. | XU Kun TANG XinYu BI QingZhen YU YangBo QIAN DeHou JI YuLei | 2023 | Science China(Technological Sciences)2023，66，3： | 0 |
| 2 | Improved closed-loop tracking interferometer measurement for a five-axis machine tool with a bi-rotary milling head显示文摘Tracking interferometer based on bi-rotary milling head is a novel scheme to conduct volumetric accuracy measurement of a five-axis machine tool.The laser beam direction of the interferometer can be regulated to follow the retroreflector by moving the bi-rotary head.This is a low-cost implementation of multilateration measurement,and its measurement accuracy is mainly affected by the error motion of the rotary axes.This paper proposes an improved multilateration principle to identify the positionindependent geometric errors of rotary axis and laser beam,and minimize their impact on the measurement uncertainty.A closed-loop tracking interferometer system installed on the spindle is developed to perform the measurement with high tracking accuracy.The device can be installed on an ordinary five-axis machine tool without modifying the machine tool structure.The proposed scheme is conducive to improving the accuracy and practical application of the tracking interferometer based on birotary milling head.Experiments with the corresponding closed-loop tracking interferometer and uncertainty analysis are conducted to verify the performance of the proposed measurement scheme. | TANG XinYu XU Kun BI QingZhen SONG ZhiYong JI YuLei QIAN DeHou | 2022 | Science China(Technological Sciences)2022，65，5： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员