|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Microstructure and Mechanical Properties of Multilayer Ti(C,N) Films by Closed-field Unbalanced Magnetron Sputtering Ion Plating显示文摘Ti(C, N) multilayer films have been prepared by closed-field unbalanced magnetron sputtering technology and using graphite target as the C supplier. Microstructural observation results showed that the Ti(C, N) films exhibited multilayer structure with most of fine nano-columnar Ti(C, N) grains existing in the films. The current of graphite target had an effect remarkably on the multilayer structure of films: the periodical thickness gradually increased as the current went up, but the grain size of films gradually decreased and even amorphous phase appeared as the current further increased. The microstructure of Ti(C, N) films changed from columnar crystallite to nanocomposite in high current of graphite target where the fine Ti(C, N) grains were distributed uniformly in the amorphous Ti(C, N) matrix, and the volume fraction of the amorphous phase increased with increasing current. Measurement results showed that the Ti(C, N) multilayer films have high microhardness and low friction coefficient, and especially the film deposited in the current of 0.9 A exhibits superior properties with optimizing hardness and friction coefficient. Based on the relationship of the microstructure and the properties of films, the multilayer structure and fine grain size of Ti(C, N) films are responsible for their well mechanical and friction properties. And choosing the graphite target as the C supplier is more propitious to decrease the friction coefficients of films. | Guojun Zhang Bin Li Bailing Jiang Dichun Chen Fuxue Yan | 2010 | Journal of Materials Science & Technology2010，26，2： | 11 |
| 2 | Solidification pattern and microstructures of AZ91D magnesium alloy through rheoforming显示文摘The optical microscope, SEM and EDS were adopted to analyze the rheoforming solidification morpholo-gies and microstructures of deformed AZ91D magnesium alloy after isothermal treatment in semisolid state. The re-sults show that primary α phase can be formed through attachment growth, when the liquid fraction is small; and primary α phase will grow in dendrites, when the liquid fraction is high. Eutectic solidification is carried out in the ways of both dissociated growth and symbiotic growth, de-pending on the morphology of primary α phase. Liquid with eutectic concentration solidifies into lamina eutectic. During solidification of the liquid pools inside grains, α phase can be formed through attachment growth. The eutectic solidifica-tion was mainly carried out in the dissociated pattern. | WANG Wuxiao YUAN Sen JIANG Bailing JIE Wanqi | 2005 | Chinese Science Bulletin2005，50，16： | 11 |
| 3 | Microstructure Evolution during Solidification of AZ91D Magnesium Alloy in Semisolid显示文摘熄灭方法的液体被采用在半固体学习团结形态学和 AZ91D Mg 合金的微观结构。结果显示那冷却的率在团结结构之上有重要效果。在熄灭的液体的冷却的率下面,主要 alpha 阶段由在原来的高山上属于增长第一哈谷物,或独立成核和生长。高冷却率让主要一阶段在“破布”或树突形状成长。最容易溶解的团结以分裂生长和共生生长被执行。分裂生长在谷物边界形成不平、大的贝它阶段,当共生生长形成薄片状的结构的 eutectic 时。小液体在内以象的一样的方法基本上分享原来的 a-phasesolidifies 内部小粒的液体,但是由于液相的更少的数量,最容易溶解的团结主要在分裂模式被执行。 | Wuxiao WANG Bailing JIANG Sen YUAN Wanqi JIE Guangyu YANG | 2006 | Journal of Materials Science & Technology2006，22，3： | 5 |
| 4 | Broadband Negative Refraction of Highly Squeezed Hyperbolic Polaritons in 2D Materials显示文摘Negative refraction of highly squeezed polaritons is a fundamental building block for nanophotonics,since it can enable many unique applications,such as deep-subwavelength imaging.However,the phenomenon of all-angle negative refraction of highly squeezed polaritons,such as graphene plasmons with their wavelength squeezed by a factor over 100 compared to free-space photons,was reported to work only within a narrow bandwidth(<1 THz).Demonstrating this phenomenon within a broad frequency range remains a challenge that is highly sought afer due to its importance for the manipulation of light at the extreme nanoscale.Here we show the broadband all-angle negative refraction of highly squeezed hyperbolic polaritons in 2D materials in the infrared regime,by utilizing the naturally hyperbolic 2D materials or the hyperbolic metasurfaces based on nanostructured 2D materials(e.g.,graphene).Te working bandwidth can vary from several tens of THz to over a hundred of THz by tuning the chemical potential of 2D materials. | Jing Jiang Xiao Lin Baile Zhang | 2018 | Research2018，，1： | 5 |
| 5 | Influence of annealing and spheroidizing treatment on microstructure and mechanical properties of AZ91 magnesium alloy显示文摘The low-strength and high-brittleness of AZ91 cast magnesium alloy mainly result from the coarse divorced eutectic phase.To solve these problems,the annealing treatment of AZ91 cast magnesium alloy was carried out at 415 ℃ and held for 24 h in this study and the alloy was then slowly cooled to room temperature in furnace.The microstructures of the alloy were observed using a metallographic microscope,a transmission electron microscopy and an emission scanning electron microscopy,respectively.The phase analysis was performed using the X-ray diffraction,and the tensile test of the specimen at ambient temperature was performed on a material test machine.The results indicate that the coarse divorced eutectic phase dissolves into the Mg matrix during the isothermal process,and the lamellar β-Mg17Al12 phase precipitates from the magnesium solid solution with a type of pearlite precipitation during furnace cooling.Consequently,the spheroidizing treatment was carried out at 320 ℃ for 20 h following the annealing process and the lamellar β-Mg17Al12 phase was spheroidized.Compared with the as-cast alloy,the strength and ductility of the AZ91 magnesium alloy are increased obviously after annealing treatment;the yield strength and tensile strength are increased to 137.8 MPa and 240.4 MPa from 102.9 MPa and 199.3 MPa,respectively;and the elongation is improved to 6.12% from 4.35%.After being spheroidized,the strength and hardness decrease a little,but the ductility is elevated to 7.23%.The nucleation,growth and spheroidizing mechanism of the lamellar β-Mg17Al12 phase were also discussed. | Zhang Jumei Wang Zhihu Jiang Bailing Chen Zishan | 2013 | China Foundry2013，10，1： | 3 |
| 6 | Preparation and characterization of the micro-arc oxidation composite coatings on magnesium alloys显示文摘The magnesium alloys attract the light-weight manufacture due to its high strength to weight ratio,however the poor corrosion resistance limits the application in automobile industry.The Micro-arc Composite Ceramic(MCC)coatings on AZ91D magnesium alloys were prepared by Micro-arc Oxidation(MAO)and electrophoresis technologies.The microstructure,corrosion resistance,abrasion resistance,stone impact resistance and adhesion of MCC coatings were studied respectively.The cross section morphologies showed that the outer organic coating was filled into the hole on surface of MAO coating,and it acted as a shelter against corrosive products.The copper-accelerated acetic acid salt spray Test,abrasion resistance test,stone impact resistance test,thermal shock resistance test and adhesion test were used to evaluate the protective characterization by the third testing organization which approved by GM.The test results showed the composite coatings meet all the requirements.The MCC coating on Mg presents excellent properties,and it is a promising surface treatment technology on magnesium alloys for production vehicles. | Yanfeng Ge Bailing Jiang Ming Liu Congjie Wang Wenning Shen | 2014 | Journal of Magnesium and Alloys2014，2，4： | 3 |
| 7 | Effect of Negatively Charged Ions on the Formation of Microarc Oxidation Coating on 2024 Aluminium Alloy显示文摘The present study deals with the effect of negatively charged ions on the ceramic coating formation on 2024 aluminium alloy during microarc oxidation (MAO) process. On the basis of the experimental results, two steps (the formation of an incipient film without arc presence and the growth of a ceramic coating with arc discharge) of MAO process have been observed. For comparison, four different negatively charged ions studied. It is proved that negatively charged ions strongly participated in the formation of an incipient film with high impedance value at the first step. The growth of ceramic coating depends on the combination between Al of the substrate and O from the electrolyte, and the negatively charged ions are little consumed. As an anodic oxide coating is prepared on the sample surface instead of the incipient film, the first step occurs easily and the growth of ceramic coating is accelerated. Furthermore, the mechanism of negatively charged ions in the formation of the MAO coating has been proposed. | Wei Yang Bailing Jiang Aiying Wang Huiying Shi | 2012 | Journal of Materials Science & Technology2012，28，8： | 2 |
| 8 | Microstructure and Corrosion Resistance of Modified AZ31 Magnesium Alloy Using Microarc Oxidation Combined with Electrophoresis Process显示文摘A top electrophoresis coating was deposited on the surface microarc oxidation (MAO) modified ceramic coating on AZ31 magnesium alloy. Microstructure and corrosion resistance of this composite coating were studied by SEM, electrochemical potentiodynamic polarization, and acid corrosion test. The results showed that the composite coating with a top electrophoresis coating on the surface of ceramic coating exhibited a better corrosion resistance compared with the coating formed by chemical conversion film combined with electrophoresis process. Corrosive ions could permeate into the substrate with corrosion time, and the composite coating was firstly destroyed around the scratch. The formation of composite coating with a higher adhesive force due to the porosity of the ceramic coating contributed to the improved corrosion resistance property. | 杨巍 WANG Ping 郭永春 JIANG Bailing YANG Fei LI Jianping | 2013 | Journal of Wuhan University of Technology(Materials Science)2013，28，3： | 2 |
| 9 | Effect of the thermostable xylanase B (XynB) from Therrnotoga maritima on the quality of frozen partially baked bread 显示文摘 | JIANG Z Q BAIL A L WU A | 2008 | J Cereal Sci2008，47，： | 1 |
| 10 | The process of growth and micro-structure of ceramic coating formed by micro-arc oxidation on magnesium alloys 显示文摘 | JIANG Bailing WU Guojian ZHANG Shufen | 2002 | Transactions of Materials and Heat Treatment2002，23，1： | 1 |
| 11 | Study on crystalline to amorphous structure transition of Cr coatings by mag-netron sputtering 显示文摘 | Li Hongtao Jiang Bailing Yang Bo | 2011 | Appl Surf Sci2011，258，2： | 1 |
| 12 | Spontaneous escape behavior of silver from graphite-like carbon coating and its inhibition mechanism显示文摘A series of silver-doped graphite-like carbon coatings was prepared on the surface of aluminum alloy using the magnetron sputtering method. The spontaneous escape behavior and inhibition mechanism of silver from graphite-like carbon coating were studied. The results showed that when the sample prepared with a 0.01-A current on the silver target was placed in an atmospheric environment for 0.5 h, an apparent silver escape phenomenon could be observed. However, the silver escape phenomenon was not observed for samples prepared with a 0.05-A current on the silver target if the sample was retained in a 10^(-1) Pa vacuum environment, even after 48 h. Compared with the sample placed in the atmospheric environment immediately after an ion plating process, the silver escape time lagged for 6 h. Nanometer-thick pure carbon coating coverage could effectively suppress silver escape. When the coating thickness reached700 nm, permanent retention of silver could be achieved in the silver-doped graphite-like carbon coating.As the silver residue content in the graphite-like carbon coating increased from 2.27 at.% to 5.35 at.%, the interfacial contact resistance of the coating decreased from 51mΩcm^2 to 6 mΩcm^2. | Wenting Shao Xinyu Zhang Bailing Jiang Cancan Liu Hongtao Li | 2017 | Journal of Materials Science & Technology2017，33，11： | 1 |
| 13 | Effect of La doping on microstructure of SnO 2 nanopowders prepared by co-precipitation method显示文摘 | Chong Fu Junbo Wang Minge Yang Xiaolei Su Jie Xu Bailing Jiang | 2010 | Journal of Non-Crystalline Solids2010，，3： | 1 |
| 14 | Vapor phase growth of two-dimensional PdSe2 nanosheets for high-photoresponsivity near-infrared photodetectors显示文摘Palladium diselenide(PdSe2),a stable layered material with pentagonal structure,has attracted extensive interest due to its excellent electrical and optoelectronic performance.Here,we report a reliable process to synthesize PdSe2 via chemical vapor deposition(CVD)method.Through systematic regulation of temperature in the growth process,we can tune the thickness,size,nucleation density and morphology of PdSe2 nanosheets.Field-effect transistors based on PdSe2 nanosheets exhibit n-type behavior and present a high electron mobility of 105 cm^2·V^−1·s^−1.The electrical property of the devices after 6 months keeping in the air show little change,implying outstanding air-stability of PdSe2.In addition,PdSe2 near-infrared photodetector shows a photoresponsivity of 660 A·W^−1 under 914 nm laser.These performances are better than those of most CVD-grown 2D materials,making ultrathin PdSe2 a highly qualified candidate material for next-generation optoelectronic applications. | Weiting Xu Jiayang Jiang Huifang Ma Zhengwei Zhang Jia Li Bei Zhao Ruixia Wu Xiangdong Yang Hongmei Zhang Bailing Li Weining Shu Zucheng Zhang Bo Li Yuan Liu Lei Liao Xidong Duan | 2020 | Nano Research2020，13，8： | 1 |
| 15 | Effect of the thermostable xylanase B (XynB) from Thermotoga maritima on the quality of frozen partially baked bread显示文摘 | Jiang Z Q Bail A L Wu A M | 2008 | Journal of Cereal Science2008，47，： | 1 |
| 16 | Dependence of growth features of microarc oxidation coatings of titanium alloy on control modes of alternate pulse 显示文摘 | Yaming Wang Bailing Jiang Tingquan Lei | 2004 | Materials Letters2004，58，： | 1 |
| 17 | The production of high-density hollow cast-iron bars by vertically continuous casting显示文摘 | Yan Guojun Xu Yang Jiang Bailing | 2012 | Journal of Materials Processing Technology2012，212，： | 1 |
| 18 | Appl Surf Sci显示文摘 | Wang Yaming Lei Tingquan Jiang Bailing | 2004 | 233:2582004，233，： | 1 |
| 19 | Effects of lanthanum, cerium and ytterbium on Ni-P deposition on quartz optical fiber surface by electroless plating 显示文摘 | JIANG B Q LIU X X BAIL X | 2007 | Journal of Rare Earths2007，25，1： | 1 |
| 20 | Microstructure and tribological properties of TiN,TiC and Ti( C, N) thin films prepared by closed-field unbalanced magnetron sputtering ion plating 显示文摘 | Zhang Guojun Li Bin Jiang Bailing | 2009 | Applied Surface Science2009，255，21： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员