|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Effect of synthesis time on morphology of CeO2 nanoparticles and Au/CeO2 and their activity in oxidative steam reforming of methanol显示文摘Ceria(CeO2)supports,synthesized by hydrothermal treatment with different synthesis time(CeO2-X h,where X is the synthesis time in h)in the presence of the surfactant cetyltrimethyl ammonium bromide,were used as supports for gold(Au)catalysts.The synthesis time significantly affects the morphological structure and crystallite size of CeO2,where CeO2-2 h has the smallest crystallite size with coexisting nanorods and nanoparticles.Transmission electron microscopy analysis confirms the morphology of CeO2 with distinctive(110),(100)and(111)planes,in agreement with interplanar spacings of 0.19,0,27 and 0.31,respectively.However,the morphology of CeO2-8 h and CeO2-48 h is mainly a truncated octahedral with crystal planes(111)and(100)accompanied by an interplanar spacing of 0.31 and0.27 nm,respectively.The CeO2-X h supports and those with a 3 wt%Au loading(Au/CeO2-X h)were investigated in the oxidative steam reforming of methanol at temperatures between 200 and 400℃.The Au/CeO2-2 h gave the highest methanol conversion level and hydrogen yield at a low temperature of 250℃.This superior catalytic performance results from the good interaction between the metal and support and the well-distributed Au species on the CeO2 support. | Srisin Eaimsumang Sujitra Wongkasemjit Sangobtip Pongstabodee Siwaporn Meejoo Smith Sukritthira Ratanawilai Nuwong Chollacoop Apanee Luengnaruemitchai | 2019 | Journal of Rare Earths2019，37，8： | 6 |
| 2 | Optimization of CO_2 adsorption capacity and cyclical adsorption/desorption on tetraethylenepentamine-supported surface-modified hydrotalcite显示文摘The objective of this research was to investigate CO_2adsorption capacity of tetraethylenepentamine-functionalized basic-modified calcined hydrotalcite(TEPA/b-c HT)sorbents at atmospheric pressure formed under varying TEPA loading levels,temperatures,sorbent weight to total gaseous flow rate(W/F)ratios and CO_2concentrations in the influent gas.The TEPA/b-c HT sorbents were characterized by means of X-ray diffraction(XRD),Fourier transform infrared spectrometry(FT–IR),thermal gravimetric analysis(TGA),Brunauer–Emmet–Teller(BET)analysis of nitrogen(N_2)adsorption/desorption and carbon–hydrogen–nitrogen(CHN)elemental analysis.Moreover,a full 2~4factorial design with three central points at a 95%confidence interval was used to screen important factor(s)on the CO_2adsorption capacity.It revealed that85.0%variation in the capacity came from the influence of four main factors and the15.0%one was from their interactions.A face-centered central composite design response surface method(FCCCD–RSM)was then employed to optimize the condition,the maximal capacity of 5.5–6.1 mmol/g was achieved when operating with a TEPA loading level of 39%–49%(W/W),temperature of 76–90°C,W/F ratio of 1.7–2.60(g·sec)/cm^3and CO_2concentration of 27%–41%(V/V).The model fitted sufficiently the experimental data with an error range of±1.5%.From cyclical adsorption/desorption and selectivity at the optimal condition,the 40%TEPA/b-c HT still expressed its effective performance after eight cycles. | Nutthavich Thouchprasitchai Nuthapol Pintuyothin Sangobtip Pongstabodee | 2018 | Journal of Environmental Sciences2018，30，3： | 2 |
| 3 | Combination of Three-stage Sink-float Method and Selective Flotation Technique for Separation of Mixed Post-consumer Plastic Waste显示文摘 | Sangobtip Pongstabodee Napatr Kunachitpimol Somsak Damronglerd | 2007 | Waste Management2007，1，1： | 1 |
| 4 | CO_2 capture performance of bi-functional activated bleaching earth modified with basic-alcoholic solution and functionalization with monoethanolamine: isotherms, kinetics and thermodynamics显示文摘CO_2 capture performance of bifunctional activated bleaching earth(ABE) was investigated at atmospheric pressure. The sorbents were characterized by means of X-ray diffraction(XRD), Brunauer–Emmett–Teller(BET), Caron-Hydrogen-Nitrogen analysis(CHN), Fourier transform infrared(FT-IR) and thermal gravimetric analysis(TGA). The CO_2 capacity was enhanced via basic-modification and monoethanolamine(MEA) loading of the ABE sorbent to obtain a bifunctional surface property. Here, basic-modified calcined ABE with a 30 wt.%MEA loading(SAB-30) showed the highest CO_2 capture capacity, but this was decreased with excess MEA loading(> 30 wt.%). At a 10%(V/V) initial CO_2 concentration feed, the maximum capacity of SAB-30 increased from 2.71 mmol/g at 30℃(without adding moisture to the feed) to 3.3 mmol/g at 50℃ when adding 10%(V/V) moisture to the feed. Increasing the moisture concentration further reduced the maximum CO_2 capacity due to the blocking effect of the excess moisture on the sorbent surface. However, SAB-30 could completely capture CO_2 even in a 100%(V/V) initial CO_2 concentration feed. A maximum CO_2 capacity of5.7 mmol/g for SAB-30 was achieved at 30℃. Varying the ratio of sorbent weight to total flow rate of the gas stream had no discernible effect on the equilibrium CO_2 capture capacity. Avrami's equation and Toth's isotherm model provided a good fitting for the data and suggested the presence of more than one reaction pathway in the CO_2 capture process and the heterogeneous adsorption surface of SAB-30. Thermodynamics studies revealed that CO_2 capture on the bifunctional SAB-30 is feasible, spontaneous and exothermic in nature. | Sangobtip Pongstabodee Phuwadej Pornaroontham Nuthapol Pintuyothin Nuttapol Pootrakulchote Nutthavich Thouchprasitchai | 2016 | Journal of Environmental Sciences2016，28，10： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员