| 1 | Numerical simulation and response analysis of microspherical focused logging in inclined micro-fractured formation显示文摘Tight and unconventional reservoirs have become the focus with the progress of petroleum exploration and development.Micro-fractures in these reservoirs can effectively improve reservoir permeability,and well-developed micro-fractures can serve to directly improve productivity.Compared with the centered electrical well logging method,the Micro Spherical Focused Logging(MSFL)is more suitable for microfracture identification due to its high resolution and near borehole wall measuring method.In this study,an anisotropic model is used to depict micro-fractured formation.First,a forward model with microfractured formation,borehole,logging instrument and surrounding rock is established.Subsequently,MSFL responses under different micro-fracture porosity,resistivity,dip angle and borehole radius,are calculated based on the finite element method(FEM).Finally,the MSFL responses under different microfracture parameters are analyzed with the response laws clarified. | Nan Zeyu Fu Weishu Liu Zhiyuan | 2023 | Energy Geoscience2023，4，2： | 0 |
| 2 | Mechanical Properties of Self-Compacting Rubberized Concrete with Different Rubber Types under Triaxial Compression显示文摘Different rubber aggregates lead to changes in the effect of stress conditions on the mechanical behavior of concrete,and studies on the triaxial properties of self-compacting rubber concrete(SCRC)are rare.In this study,35 cylindrical specimens taking lateral stress and rubber type as variables were prepared to study the fresh properties and mechanical behaviors of SCRC under triaxial compression,where the rubber contains two types,i.e.,380μm rubber powder and 1–4 mm rubber particles,and four contents,i.e.,10%,20%and 30%.The test results demonstrated that SCRC exhibited a typical oblique shear failure mode under triaxial compression and had a more moderate descending branch compared with self-compacting concrete(SCC).The presence of lateral stress can significantly improve the compression properties,including initial elastic modulus,peak stress and peak strain,with an improvement range of 3%–73%for peak stress.While rubber aggregates mainly targeted the deformation abilities and toughness for improvement,and the peak strain improvement ranges were 0.1–3.1 times and 0.1–1.0 times for SCRC containing rubber powder and SCRC containing rubber particles,respectively,relative to SCC.At a high lateral stress of at least 12 MPa,the loss of strength due to the addition of rubber can be controlled within 10%,in which case the content of rubber powder and rubber particles was recommended to be at most 20%and 30%,respectively.Based on the Mohr-Coulomb theory,the failure criteria of SCRC with different rubber types were established.For analysis and design purposes,an empirical model was proposed to predict the stressstrain behavior under triaxial compression,considering the influence of different rubber content and lateral stress.The results obtained in this study can provide a valuable reference for the design and application of self-compacting rubberized concrete in practical projects,especially those involving three-way compression states and requiring high-quality deformation and energy dissipation. | Chunli Meng Weishu Fu Jianzeng Shen Yisheng Su Chunying Ye | 2023 | Journal of Renewable Materials2023，11，2： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员