|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Mechanical behavior of coal under different mining rates:A case study from laboratory experiments to field testing显示文摘During the development of hot dry rock,the research on thermal fatigue damage caused by thermal shock of cold and heat cycles is the basis that ensures the long-term utilization of geothermal resources,but there are not enough relevant studies at present.Based on this,the thermal damage tests of granite at different temperatures(250,350,450°C)and quenching cycles(1,5,10,15 cycles)were carried out.Preliminary reveals the damage mechanism and heat transfer law of the quenching cycle effect on hot dry rock.The results show that with the increase of temperature and cycles,the uneven thermal expansion of minerals and the thermal shock caused by quenching promote the crack development of granite,resulting in the decrease of P-wave velocity,thermal conductivity and uniaxial compressive strength of granite.Meanwhile,the COMSOL was used to simulate the heat transfer of hot dry rock under different heat treatment conditions.It concluded that the increase in the number of quenching cycles reduced the heat transfer capacity of the granite,especially more than 10 quenching cycles,which also reflects that the thermal fatigue damage leads to a longer time for the temperature recovery of the hot dry rock mass.In addition,the three-dimensional nonlinear fitting relationship among thermal conductivity,temperature and cycle number was established for the first time,which can better reveal the change rule of thermal conductivity after quenching thermal fatigue effect of hot dry rock.The research results provide theoretical support for hot dry rock reservoir reconstruction and production efficiency evaluation. | Mingzhong Gao Jing Xie Yanan Gao Wenyong Wang Cong Li Bengao Yang Junjun Liu Heping Xie | 2021 | International Journal of Mining Science and Technology2021，31，5： | 39 |
| 2 | Experimental study on the mechanical and failure behaviors of deep rock subjected to true triaxial stress:A review显示文摘It has become an inevitable trend of human development to seek resources from the deep underground.However,rock encountered in deep underground engineering is usually in an anisotropic stress state(σ_(1)>σ>σ_(3))due to the influences of geological structures and engineering disturbances.It is therefore essential to study the mechanical,seepage,and dynamic disaster behaviors of deep rock under true triaxial stress to ensure the safe operation of deep rock engineering and the efficient exploitation of deep resources.In recent years,experimental techniques and research on true triaxial rock mechanics have achieved fruitful results that have promoted the rapid development of deep rock mechanics;thus,it is necessary to systematically review and summarize these developments.This work first introduced several typical true triaxial testing apparatus and then reviewed the corresponding research progress on rock deformation,strength,failure mode,brittleness,and energy as well as the 3D volumetric fracturing(dynamic disaster)properties of deep rocks under true triaxial stress.Then,several commonly used true triaxial rock strength criteria and their applicability,the permeability characteristics and mathematical models of deep reservoir rocks,and the disaster-causing processes and mechanisms of disturbed volumetric fracturing(rockburst,compound dynamic disasters)in deep rock engineering were described.This work may provide an essential reference for addressing the true triaxial rock mechanics issues involved in deep rock engineering,especially regarding the stability of surrounding rock at depth,disaster prevention and control,and oil and gas exploitation. | Heping Xie Jun Lu Cunbao Li Minghui Li Mingzhong Gao | 2022 | International Journal of Mining Science and Technology2022，32，5： | 13 |
| 3 | Evolution of a mining induced fracture network in the overburden strata of an inclined coal seam显示文摘The geological conditions of the Pingdingshan coal mining group were used to construct a physical model used to study the distribution and evolution of mining induced cracks in the overburden strata.Digital graphics technology and fractal theory are introduced to characterize the distribution and growth of the mining induced fractures in the overburden strata of an inclined coal seam.A relationship between fractal dimension of the fracture network and the pressure in the overburden strata is suggested.Mining induced fractures spread dynamically to the mining face and up into the roof as the length of advance increases.Moreover,the fractal dimension of the fracture network increases with increased mining length,in general,but decreases during a period from overburden strata separation until the main roof collapses.It is a1so shown that overburden strata pressure plays an important role in the evolution of mining induced fractures and that the fractal dimension of the fractures increases with the pressure of the overburden. | Wei Xiujun Gao Mingzhong Lv Youchang Shi Xiangchao Gao Hailian Zhou Hongwei | 2012 | International Journal of Mining Science and Technology2012，22，6： | 7 |
| 4 | Relevance between abutment pressure and fractal dimension of crack network induced by mining显示文摘Based on the geological conditions of coal mining face No.15-14120 at No.8 mine of Pingdingshan coal mining group,the real-time evolution of coal-roof crack network with working face advancing was collected with the help of intrinsically safe borehole video instrument.And according to the geology of this working face,a discrete element model was calculated by UDEC.Combining in situ experimental data with numerical results,the relationship between the fractal dimension of boreholes'wall and the distribution of advanced abutment pressure was studied under the condition of mining advance.The results show that the variation tendency of fractal dimension and the abutment pressure has the same characteristic value.The distance between working face and the peak value of the abutment pressure has a slight increasing trend with the advancing of mining-face.When the working face is set as the original point,the trend of fractal dimension from the far place to the origin can be divided into three phases:constant,steady increasing and constant.And the turning points of these phases are the max-influencing distance(50 m)and peak value(15 m)of abutment pressure. | Gao Mingzhong Jin Wencheng Dai Zhixu Xie Jing | 2013 | International Journal of Mining Science and Technology2013，23，6： | 7 |
| 5 | Numerical simulation of spatial distributions of mining-induced stress and fracture fields for three coal mining layouts显示文摘In this study, the spatial distributions of stress and fracture fields for three typical underground coal mining layouts, i.e. non-pillar mining(NM), top-coal caving mining(TCM) and protective coal-seam mining(PCM), are modeled using discrete element software UDEC. The numerical results show that different mining layouts can lead to different mining-induced stress fields, resulting in diverse fracture fields. For the PCM, the mining influenced area in front of the mining faces is the largest, and the stress concentration factor in front of the mining faces is the lowest. The spatial shapes of the mining-induced fracture fields under NM, TCM and PCM differ, and they are characterized by trapezoidal, triangular and tower shapes, respectively. The fractal dimensions of mining-induced fractures of the three mining layouts decrease in the order of PCM, TCM and NM. It is also shown that the PCM can result in a better gas control effect in coal mines with high outburst potential. The numerical results are expected to provide a basis for understanding of mining-induced gas seepage fields and provide a reference for highefficiency coal mining. | Shengwei Li Mingzhong Gao Xiaojun Yang Ru Zhang Li Ren Zhaopeng Zhang Guo Li Zetian Zhang Jing Xie | 2018 | Journal of Rock Mechanics and Geotechnical Engineering2018，10，5： | 3 |
| 6 | Phase Ⅲ Clinical Trials of the Cell Differentiation Agent-2 (CDA-2): Therapeutic Efficacy on Breast Cancer, Non-Small Cell Lung Cancer and Primary Hepatoma显示文摘 | Fengyi Feng Qing Lu Changquan Ling Yang Zhang Fengzhan Qin Huaqing Wang Wenxia Huang Shunchang Jiao Qiang Chen Mingzhong Li Yunzhong Zhu Meizhen Zhou Jun Ren Yetao Gao Jingpo Zhao Rongsheng Zheng Wenhua Zhao Zhiqiang Meng Fang Li Qizhong Zhang Dongli Zhao Liyan Xu Yongqiang Zhang Yanjun Zhang Zhenjiu Wang Shuonqi Liu Ming C. Liau | 2005 | Chinese Journal of Clinical Oncology2005，2，4： | 3 |
| 7 | Mechanism of micro-wetting of highly hydrophobic coal dust in underground mining and new wetting agent development显示文摘The internal mechanism of the high hydrophobicity of the coal samples from the Pingdingshan mining area was studied through industrial,element,and surface functional group analysis.Laboratory testing and molecular dynamics simulations were employed to study the impact of three types of surfactants on the surface adsorption properties and wettability of highly hydrophobic bituminous coal.The results show that the surface of highly hydrophobic bituminous coal is compact,rich in inorganic minerals,and poorly wettable and that coal molecules are dominated by hydrophobic functional groups of aromatic rings and aliphatic structures.The wetting performance of surfactants as the intermediate carrier to connect coal and water molecules is largely determined by the interaction force between surfactants and coal(Fs-c)and the interaction force between surfactants and water(Fs-w),which effectively improve the wettability of modified coal dust via modifying its surface electrical properties and surface energy.A new type of wetting agent with a dust removal rate of 89%has been developed through discovery of a compound wetting agent solution with optimal wetting and settling performance.This paper provides theoretical and technical support for removing highly hydrophobic bituminous coal dust in underground mining. | Mingzhong Gao Hongmei Li Yun Zhao Yiting Liu Weiqi Zhou Luming Li Jing Xie Jie Deng | 2023 | International Journal of Mining Science and Technology2023，33，1： | 2 |
| 8 | The Mechanism of TBM Cutter Wear in Mixed Ground 显示文摘 | GAO Mingzhong LI Chao SHI Xiangchao | 2012 | Advanced Materials Research2012，446，： | 1 |
| 9 | 3D forward modeling and response characteristics of low-resistivity overburden of the CFS-PML absorbing boundary for ground-well transient electromagnetic method显示文摘This study used the stable and convergent Dufort-Frankel method to differentially discretize the diffusion equation of the ground-well transient electromagnetic secondary field.The absorption boundary condition of complex frequency-shifted perfectly matched layer(CFS-PML)was used for truncation so that the low-frequency electromagnetic wave can be better absorbed at the model boundary.A typical three-dimensional(3D)homogeneous half-space model was established and a low-resistivity cube model was analyzed under the half-space condition.The response patterns and drivers of the low-resistivity cube model were discussed under the influence of a low-resistivity overburden.The absorption boundary conditions of CFS-PML significantly affected the low-frequency electromagnetic waves.For a low-resistivity cube around the borehole,its response curve exhibited a single-peak,and the extreme point of the curve corresponded to the center of the low-resistivity body.When the low-resistivity cube was directly below the borehole,the response curve showed three extreme values(two high and one low),with the low corresponding to the center of the low-resistivity body.The total field response of the low-resistivity overburden was stronger than that of the uniform half-space model due to the low-resistivity shielding effect of electromagnetic waves.When the receiving-transmitting distance gradually increased,the effect of the low-resistivity overburden was gradually weakened,and the response of the low-resistivity cube was strengthened.It was affected by the ratio of the overburden resistivity to the resistivity of the low-resistivity body. | Lijuan Zhao Mingzhong Gao Nengzhong Lei Hongfei Duan Weizhong Qiu Zhaoying Chen | 2023 | International Journal of Mining Science and Technology2023，33，12： | 0 |
| 10 | Research progress and application of deep in-situ condition preserved coring and testing显示文摘With the depletion of shallow resources,the exploration of deep earth resources has become a global strategy.The study of the different patterns in the physical mechanical properties of rocks at different occurrence depths is the basis for exploring deep into the earth,with the core and premise being the acquisition and testing of deep in-situ core specimens.Based on the original idea of deep in-situ condition preserved coring(ICP-Coring)and testing,combined with theoretical modeling,numerical analysis,test platform development,indoor testing and engineering application,the principles and technologies of deep ICP-Coring are developed.This principle and technology consists of five parts:in-situ pressurepreserved coring(IPP-Coring),in-situ substance-preserved coring(ISP-Coring),in-situ temperaturepreserved coring(ITP-Coring),in-situ light-preserved coring(ILP-Coring),and in-situ moisturepreserved coring(IMP-Coring).The theory and technology of temperature and pressure reconstruction at different occurrence depths and in different environments are proposed,and prototype trial production was completed by following the principle of displacement and tests based on the in-situ reconstructed environment.The notable advances are as follows:(1)Deep in-situ coring system:A pressure-preserved controller with an ultimate bearing capacity greater than 140 MPa,highperformance(temperature-resistant,pressure-resistant,and low thermally conductive)temperaturepreserved materials,an active temperature control system,and high-barrier quality-preserved membrane materials were developed;a deep ICP-Coring capacity calibration platform was independently developed,a deep in-situ coring technology system was developed,and the acquisition of deep in-situ cores was realized.(2)In-situ storage displacement system:Following the dual-circuit hydraulic design idea,a single-drive source push-pull composite grabbing mechanism was designed;the design of the overall structure for the deep in-situ displacement storage system and ultrahigh pressure cabin structure was completed,which could realize docking the coring device and core displacement in the in-situ reconstructed environment.(3)Test analysis system:A noncontact acoustic-electric-magnetic test system was developed under the in-situ reconstructed environment,and the errors between the test results and traditional contact test results were mostly less than 10%;a detachable deep in-situ core true triaxial test system was developed,which could perform loading tests for deep in-situ cores.The relevant technological achievements were successfully applied to the exploration and development of deep resources,such as deep mines,deep-sea natural gas hydrates,and deep oil and gas.The research results provide technical and equipment support for the construction of a theoretical system for deep in-situ rock mechanics,the development of deep earth resources and energy,and the scientific exploration of different layers and occurrence depths(deep and ultradeep)of the Earth. | Heping Xie Yunqi Hu Mingzhong Gao Ling Chen Ru Zhang Tao Liu Feng Gao Hongwei Zhou Xiaobo Peng Xiongjun Li Jianbo Zhu Cunbao Li Ruidong Peng Yanan Gao Cong Li Jianan Li Zhiqiang He | 2023 | International Journal of Mining Science and Technology2023，33，11： | 0 |
| 11 | Selection and thermal physical characteristics analysis of in-situ condition preserved coring lunar rock simulant in extreme environment显示文摘With the increasing scarcity of Earth’s resources and the development of space science and technology,the exploration, development, and utilization of deep space-specific material resources(minerals, water ice, volatile compounds, etc.) are not only important to supplement the resources and reserves on Earth but also provide a material foundation for establishing extraterrestrial research bases. To achieve large depth in-situ condition-preserved coring(ICP-Coring) in the extreme lunar environment, first, lunar rock simulant was selected(SZU-1), which has a material composition, element distribution, and physical and mechanical properties that are approximately equivalent to those of lunar mare basalt. Second, the influence of the lunar-based in-situ environment on the phase, microstructure, and thermal physical properties(specific heat capacity, thermal conductivity, thermal diffusivity, and thermal expansion coefficient)of SZU-1 was explored and compared with the measured lunar rock data. It was found that in an air atmosphere, low temperature has a more pronounced effect on the relative content of olivine than other temperatures, while in a vacuum atmosphere, the relative contents of olivine and anorthite are significantly affected only at temperatures of approximately-20 and 200 ℃. When the vacuum level is less than100 Pa, the contribution of air conduction can be almost neglected, whereas it becomes dominant above this threshold. Additionally, as the testing temperature increases, the surface of SZU-1 exhibits increased microcracking, fracture opening, and unevenness, while the specific heat capacity, thermal conductivity,and thermal expansion coefficient show nonlinear increases. Conversely, the thermal diffusivity exhibits a nonlinear decreasing trend. The relationship between thermal conductivity, thermal diffusivity, and temperature can be effectively described by an exponential function(R^(2)>0.98). The research results are consistent with previous studies on real lunar rocks. These research findings are expected to be applied in the development of the test and analysis systems of ICP-Coring in a lunar environment and the exploration of the mechanism of machine-rock interaction in the in-situ drilling and coring process. | Haichun Hao Mingzhong Gao Cunbao Li Xuan Wang Yan Wu Zheng Gao Wen Yu Xuemin Zhou | 2023 | International Journal of Mining Science and Technology2023，33，11： | 0 |
| 12 | Direct measurement and theoretical prediction model of interparticle adhesion force between irregular planetary regolith particles显示文摘Interparticle adhesion force has a controlling effect on the physical and mechanical properties of planetary regolith and rocks.The current research on the adhesion force of planetary regolith and rock particles has been primarily based on the assumption of smooth spherical particles to calculate the intergranular adhesion force;this approach lacks consideration for the adhesion force between irregular shaped particles.In our study,an innovative approach was established to directly measure the adhesion force between the arbitrary irregular shaped particles;the probe was modified using simulated lunar soil particles that were a typical representation of planetary regolith.The experimental results showed that for irregular shaped mineral particles,the particle size and mineral composition had no significant influence on the interparticle adhesion force;however,the complex morphology of the contact surface predominantly controlled the adhesion force.As the contact surface roughness increased,the adhesion force gradually decreased,and the rate of decrease gradually slowed;these results were consistent with the change trend predicted via the theoretical models of quantum electrodynamics.Moreover,a theoretical model to predict the adhesion force between the irregular shaped particles was constructed based on Rabinovich’s theory,and the prediction results were correlated with the experimental measurements. | Heping Xie Qi Wu Yifei Liu Yachen Xie Mingzhong Gao Cunbao Li | 2023 | International Journal of Mining Science and Technology2023，33，11： | 0 |
| 13 | Geological Settings and Significance of Zigong Global Geopark显示文摘This paper introduced fossil resources,geographical settings and significance of Zigong Global Geopark.In addition,in the long history of local well salt production,remarkable ten great science and technology inventions were created,and numerous well salt production relics were perfectly preserved,thus they have high scientific value and significance.On the basis of field survey and detailed researches,the authors analyzed geological settings in the geopark and significance in depth.The results deduced by the authors can help understand the geoheritage resources in Zigong Global Geopark,and also provide a basis for the protection,development and utilization of geoheritage as well as the planning and management of the geopark. | YOU Yuning TIAN Mingzhong GAO Lujun | 2013 | Journal of Landscape Research2013，5，9： | 0 |
| 14 | Hsp83 regulates the fate of germline stem cells in Drosophila ovary显示文摘In adult tissues,stem cells are defined by their unique capacity to self-renew and produce differentiated cells to maintain tissue homeostasis.Drosophila ovarian germline stem cells(GSCs)provide a powerful model for investigating the regulatory mechanisms underlying stem cell fate determination in vivo(Chen and Mckearin, | Dongsheng Chen Shuang Wang Xiaoqian Tao Lijuan Zhou Jian Wang Fuling Sun Mingzhong Sun Xiaoli Gao | 2018 | Journal of Genetics and Genomics2018，45，4： | 0 |
| 15 | Preliminary research and scheme design of deep underground in situ geo-information detection experiment for Geology in Time显示文摘The deep earth,deep sea,and deep space are the main parts of the national“three deep”strategy,which is in the forefront of the strategic deployment clearly defined in China’s 14th Five-Year Plan(2021-2025)and the Long-Range Objectives Through the Year 2035.It is important to reveal the evolutionary process and mechanism of deep tectonics to understand the earth’s past,present and future.The academic con-notation of Geology in Time has been given for the first time,which refers to the multi-field evolution response process of geological bodies at different time and spatial scales caused by geological processes inside and outside the Earth.Based on the deep in situ detection space and the unique geological envi-ronment of China Jinping Underground Laboratory,the scientific issue of the correlation mechanism and law between deep internal time-varying and shallow geological response is given attention.Innovative research and frontier exploration on deep underground in situ geo-information detection experiments for Geology in Time are designed to be carried out,which will have the potential to explore the driving force of Geology in Time,reveal essential laws of deep earth science,and explore innovative technologies in deep underground engineering. | Heping Xie Ru Zhang Zetian Zhang Yinshuang Ai Jianhui Deng Yun Chen Yong Zhou Mingchuan Li Liqiang Liu Mingzhong Gao Zeqian Yang Weiqiang Ling Heng Gao Qijun Hao Kun Xiao Chendi Lou | 2024 | International Journal of Mining Science and Technology2024，34，1： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员