|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Study on improvement of conductivity of Cu-Cr-Zr alloys显示文摘The influence of alloying, heat treatment, and plastic working on the performance of Cu-Cr-Zr alloys was investigated. The precipitated phases were characterized as Cr, Cu51Zr14 and Cu5Zr. Cu-Cr-Zr alloys demonstrate combination properties of high strength and high conductivity after solution treatment, aging treatment, and plastic deformation. Precipitation course of Cr is the main factor that influences the conductivity of Cu-Cr-Zr alloys, while adding Zr in the alloys adjusts the orientation relationship between Cr and matrix, and tends to increase the conductivity of aged Cu-Cr-Zr alloys after deformation. | LI Huaqing XIE Shuisheng WU Pengyue MI Xujun | 2007 | Rare Metals2007，26，2： | 11 |
| 2 | Application of GIS in Mineral Resource Prediction of Synthetic Information显示文摘This paper introduces the formation mechanism and synthetic information prediction of large and superlarge deposits in Shandong Province by analyzing and studying on the GIS platform. The authors established a prospecting model of synthetic information from large and superlarge gold deposit concentration region, and the multi-source spatial database from concentration region of deposits and anomalies. On the basis of the spatial database, a target map layer, a model map layer and a predictive map layer were set up. Based on these map layers, geological variables of the model unit and predictive unit were extracted, then launched location and quantitative prediction of the gold deposit concentration region. The achievement of predicting large and superlarge deposits by the GIS platform has enabled the authors to design automation (or semi-automatic) interpretation subsystems, namely geophysics, geochemistry, geologic prospecting and comprehensive prognosis, and a set of the applicable GIS software for mineral resources prognosis of synthetic information. | Ye Shuisheng Wang Shicheng Li Deqiong Mineral Resources Institute of Comprehensive Information Prediction, Jilin University, Changchun 130026 | 2003 | Journal of China University of Geosciences2003，14，3： | 7 |
| 3 | Multimode Interference Refractive Index Sensor Based on Coreless Fiber显示文摘multimode 干扰折射索引(RI ) 传感器数字地并且试验性地基于无核心的纤维被表明。二相同单个模式纤维(SMF ) 在什么时候的能被看作微弱地与步索引侧面指导 multimode 纤维(MMF ) 的等价物的无核心的纤维的节的两结束被拼接包围折射索引(SRI ) 比无核心的纤维的低。因此,它成为常规单个模式的 multimode 单个模式(SMS ) 纤维结构但是与一种更大的核心尺寸。产量系列将由于无核心的纤维的直接暴露在 SRI 与变化一起变。在不同 SRI 下面的产量系列数字地被学习,以及有无核心的纤维的不同长度和直径的敏感。断言和计算与试验性的结果显示出好协议。证明由确认可行的建议 RI 传感器试验,并且相对错误仅仅是 0.1% 哪个占据了更好的察觉到的性能和有实行可能。 | Yang Li Zhibo Liu Shuisheng Jian | 2014 | Photonic Sensors2014，4，1： | 4 |
| 4 | Ag_(2)Se Complex Nanostructures with Photocatalytic Activity and Superhydrophobicity显示文摘Single-crystalline Ag_(2)Se complex nanostructures have been synthesized via a solvothermal route in which selenophene(C4H4Se)as a selenylation source reacts with AgNO3 at a temperature of 240°C.An orthorhombic phaseβ-Ag_(2)Se nanostructure was identified by X-ray diffraction(XRD),Raman spectroscopy,field emission scanning electron microscopy(FE-SEM),high resolution transmission electron microscopy(HRTEM),and photoluminescence(PL)spectroscopy.The wettability of the as-synthesizedβ-Ag_(2)Se nanostructure was studied by measurement of the water contact angle(CA).Static water CA values of over 150°were obtained,which can be attributed to theβ-Ag_(2)Se complex nanostructure having a combination of micro-and nanostructures.The superhydrophobic Ag_(2)Se nanostructure may find applications in self-cleaning.Additionally,the photocatalytic activity of the as-synthesizedβ-Ag_(2)Se nanostructure was evaluated by photodegradation of rhodamine B(RhB)dye under ultraviolet(UV)light irradiation. | Huaqiang Cao Yujiang Xiao Yuexiang Lu Jiefu Yin Baojun Li Shuisheng Wu Xiaoming Wu | 2010 | Nano Research2010，3，12： | 4 |
| 5 | Phase and Microstructure Analysis of Cu-Cr-Zr Alloys显示文摘当演员组和 Cr 的使变形的state.Solute富有的簇,应当在老化处理期间形成,被观察在,Cu-(0.4%-2.0%)Cr-(0.05%-0.16%) Zr 合金的阶段在两个被分析是扔了状态;与形态学特性一起, Cr 阶段在的相应优先的取向当演员组状态也被调查。猛抛被观察与一个双性人一起在矩阵散布形式的分发, viz.coarse 与比几百纳米大的尺寸猛抛,罚款与 intermetallics, Cu5iZri4 的普通混合物,相应地很少发生的 Cu5Zr 和稀罕 Cu_8Zr3 的 2-10 nm.Three 类型的尺寸猛抛,在不同样品被描绘。 | Huaqing LI Shuisheng XIE Xujun MI Pengyue WU | 2007 | Journal of Materials Science & Technology2007，23，6： | 3 |
| 6 | Texture of deformed Cu-Cr-Zr alloys显示文摘The influences of plastic deformation, aging treatment, and alloying elements on the texture of Cu-Cr-Zr alloys were explored. The texture component and intensity of Cu-Cr-Zr alloys under various working conditions after aging treatment were characterized using the orientation distributing function (ODF). The influence of Zr content on the texture of Cu-Cr-Zr alloys was also analyzed. The reduction pass and deformation level were primary factors influencing the texture. Rolling texture appeared in a rolled plate and the fibrous textures of {111} and {001} were detected after 80% deformation. Fibrous texture with a main constituent of {111} improved the tensile strength of the alloy wire. The texture contents of {110}<331> and {110}<112> were predominated, whereas, those of {113}<332> and {112}<111> were in the minority in the Cu-Cr-Zr alloy with a higher Zr content (>0.5wt%). However, in the samples with a lower Zr content (<0.1wt%), the texture contents of {113}<332>, {112}<111>, and {111}<110> were in the majority. | Huaqing Li Shuisheng Xie Xujun Mi Pengyue Wu Yanfeng Li | 2008 | Journal of University of Science and Technology Beijing2008，15，4： | 2 |
| 7 | Influence of Procedure Parameters on Rheological Property of Semi-Solid AZ91D Magnesium Alloy显示文摘Semi-solid AZ91D magnesium alloy was investigated in isothermal steady-state condition. The influence of stirring technological parameters such as stirring temperature and shear rate to apparent viscosity of semi-solid alloy slurry was discussed. Apparent viscosity increases with stirring temperature decreases at the same shear rate. At the same stirring temperature, apparent viscosity decreases rapidly at first with shear rate increases, and then apparent viscosity decreases slowly with shear rate increases, when shear rate reaches a certain value, apparent viscosity appears tiny increase. According to the experimental data, the relation between solid volume fraction and apparent viscosity of semi-solid AZ9l D alloy at shear rate 238 s- 1 is fitted by regression method, it supplies useful data to the numerical simulation of semi-solid AZ91D alloy die casting process. | Jiang Yunxi Xie Shuisheng Li Xinggang Li Lei | 2004 | Journal of Rare Earths2004，22，z2： | 2 |
| 8 | Collaborative beamforming based on directional perturbation using one bit feedback显示文摘A novel collaborative beamforming algorithm is proposed in a wireless communication system with multiple transmitters and one receiver. All transmitters take part in the collaboration and the weighted message is transmitted simultaneously. In order to maximize the beamforming gain, the transmitters use one bit feedback information to adjust the phase offset. It tracks the direction in which the signal strength at the receiver can increase. The directional search and perturbation theory is used to achieve the phase alignment. The feasibility of the proposed algorithm is proved both experimentally and theoretically. Simulation results show that the proposed algorithm can improve the convergent speed of the phase alignment. | Haifen Yang Ning Ding Zhi Zheng Shuisheng Lin Zhongpei Zhang Guangjun Li | 2016 | Journal of Systems Engineering and Electronics2016，27，3： | 2 |
| 9 | Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites 显示文摘 | Shuisheng Sun Chunzhong Li Ling Zhang | 2006 | European Polymer Journal2006，，42： | 1 |
| 10 | Numerical simulation of the preparation of semi-solid metal slurry with damper cooling tube method显示文摘In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new ap- proach named the damper cooling tube method (DCT), to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry proper- ties were studied in detail. | Haoqiang Yang Shuisheng Xie Lei Li | 2007 | Journal of University of Science and Technology Beijing2007，14，5： | 1 |
| 11 | Effects of surface modification of fumed silieaon interfacial structures and mechanical properties of poly (vinyl chloride) composites 显示文摘 | SUN Shuisheng LI Chunzhong ZHANG Ling | 2006 | European Polymer Journal2006，42，7： | 1 |
| 12 | Regulation of bone phosphorus retention and bone development possibly by related hormones and local bone-derived regulators in broiler chicks显示文摘Background:Phosphorus is essential for bone mineralization in broilers,however,the underlying mechanisms remain unclear.We aimed to investigate whether bone phosphorus retention and bone development might be regulated by related hormones and local bone-derived regulators in broilers.Methods:Broilers were fed diets containing different levels of non-phytate phosphorus(NPP)0.15%,0.25%,0.35%,0.45% and 0.55% or 0.15%,0.22%,0.29%,0.36% and 0.43% from 1 to 21 or 22 to 42 days of age.Serum and tibia samples were collected for determinations of bone phosphorus retention and bone development parameters,related hormones and local bone-derived regulators of broiler chickens on d 14,28 and 42,respectively.Results:Tibia ash phosphorus,total phosphorus accumulation in tibia ash(TP_(TA)),bone mineral concentration(BMC),bone mineral density(BMD),bone breaking strength(BBS),and ash on d 14,28 or 42,serum 1,25-dihydroxyvitamin D_(3)(1,25(OH)_(2)D_(3))on d 28 and 42,mRNA expressions of tibia fibroblast growth factor 23(FGF23)and dentin matrix protein 1(DMP1)on d 14 and 28 increased linearly or quadratically(P<0.05),while serum parathyroid hormone(PTH)on d 28,tibia alkaline phosphatase(ALP)on d 14,28 and 42,bone gal protein(BGP)on d 14,and mRNA expression of tibia phosphate-regulating gene with homologies to endopeptidases on the X chromosome(PHEX)on d 14 and 28 decreased linearly or quadratically(P<0.04)as dietary NPP level increased.TPTA,BMC,BMD,and ash on d 28 and 42,BBS on d 28,and ash phosphorus on d 42 were positively correlated(r=0.389 to 0.486,P<0.03)with serum 1,25(OH)_(2)D_(3).All of the above parameters were positively correlated(r=0.380 to 0.689,P<0.05)with tibia DMP1 mRNA expression on d 14,28 and 42,but negatively correlated(r=−0.609 to−0.538,P<0.02)with serum PTH on d 28,tibia ALP on d 14,28 and 42,and BGP on d 14.TP_(TA),BMC and ash on d 14 and BMD on d 28 were negatively correlated(r=−0.397 to−0.362,P<0.03)with tibia PHEX mRNA expression,and BMD on d 28 was positively correlated(r=0.384,P=0.04)with tibia FGF23 mRNA expression.Conclusions:These results suggested that bone phosphorus retention and bone development parameters had moderate to strong correlations with serum PTH and 1,25(OH)2D3 and tibia DMP1,PHEX,FGF23,ALP and BGP in broilers during the whole growth period,and thus they might be partly regulated by these related hormones and local bone-derived regulators. | Sumei Cao Tingting Li Yuxin Shao Liyang Zhang Lin Lu Rijun Zhang Shuisheng Hou Xugang Luo Xiudong Liao | 2022 | Journal of Animal Science and Biotechnology2022，13，1： | 1 |
| 13 | LC-ESI- MS-MS Determination of Rat Plasma Protein Binding of Major Flavonoids of Flos Lonicerae Japonicae by Centrifugal Ultrafiltration显示文摘 | Luo Yongdong Wu Shuisheng Li Xiaoyan | 2012 | Chromatographia2012，72，1： | 1 |
| 14 | Design and fabrication of erbium doped photosensitive fibers显示文摘A kind of erbium doped photosensitive fiber(EDPF) was proposed and fabricated,whose core was made of double layers named photosensitive layer and erbium doped layer.The double-layer core de-sign can overcome difficulties in fabrication of EDPF with single core design,i.e.the conflict between the high consistency rare earth doping and high consistency germanium doping.A sample was fabri-cated through the modified chemical vapor deposition method combined with solution doping tech-nique.The peak absorption coefficient was 48.80 dB/m at 1.53 μm,the background loss was lower than 0.1 dB/m,and the reflectivity of the fiber Brag gratings(FBG) written directly on the sample fiber was up to 97.3% by UV-writing technology.Moreover,a C band tunable fiber laser was fabricated using the sample fiber,in which a uniform FBG was written directly on EDPFs as a reflector.A single wavelength lasing with a maximum wavelength tuning range of 1555.2―1558.0 nm was achieved experimentally.Within this tuning range,the full-width at half maximum(FWHM) of the laser output was smaller than 0.015 nm and the side mode suppression ratio(SMSR) was better than 50 dB. | LI Jian LIU Peng LU ShaoHua WANG Jing MAO XiangQiao WEI Huai FU YongJun ZHENG Kai NING TiGang LI TangJun JIAN ShuiSheng | 2009 | Science China(Technological Sciences)2009，52，5： | 1 |
| 15 | Cellular automaton modeling of semisolid microstructure formation显示文摘Computer modeling of semi-solid structure formation is of significance in both understanding the mechanisms of globular structure formation and determining the effect of solidification conditions on final microstructure.A modified cellular automaton(mCA) model has been developed,which is coupled with macroscopic models for heat transfer calculation and microscopic models for nucleation and grain growth.The mCA model is applied to A356 Al alloy-one of the most widely used semi-solid alloys,to predict grain morphology and grain size during semi-solid solidification,and determines the effects of pouring temperature on the final microstructure.The modeling results show that the lower the initial temperature,the finer grain size will be obtained.In addition,the model can be used to predict the solutal micro-segregation. | Li Qiang Yu Baoyi Zhang Huawen Li Runxia Wang Feng Xie Shuisheng Huang Guojie Wang Hao | 2010 | China Foundry2010，7，2： | 1 |
| 16 | Long-haul WDM system through conventional single mode optical fiber with dispersion compension bvy chirp fiber Bragg grating显示文摘 | Pei Li Jian Shuisheng Yan Fengping | 2003 | Opitcal communications2003，222，： | 1 |
| 17 | Phase and microstructure analysis of Cu-Cr-Zr alloys显示文摘 | Huaqing Li Shuisheng Xie Xuiun Mi | 2006 | Material Science and Technology2006，23，： | 1 |
| 18 | Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites显示文摘 | SUN Shuisheng LI Chunzhong ZHANG Ling | 2006 | European Polymer Journal2006，42，7： | 1 |
| 19 | Analysis of coupling from core mode to counter-propagating radiation modes in tilted fiber Bragg gratings显示文摘Radiation-mode coupling is stronger and more efficient in tilted fiber Bragg gratings than in other fiber gratings; it has good advantage in such fields as optical communication and optical sensors. A simplified coupled-mode theory (CMT) approach is proposed for what we believe to be the first time, whose validity is demonstrated by comparing its simulation results with that of the complete CMT equations. With the simplified CMT approach, a theoretical spectral analysis of coupling from core mode to counter-propagating radiation modes in reflective tilted fiber Bragg gratings is presented. The influence of grating length, refractive index modulation amplitude and tilt angle is exhaustively investigated on the transmission spectrum characteristics. The different dependences between s-polarized and p-polarized radiation-mode coupling on grating tilt angle are discussed, and the coupling strength of 45 -tilted gratings shows the greatest polarization dependence with the limitation of backward-propagating radiation-mode coupling. | LU ShaoHua 1,2 , XU Ou 1,2 , FENG SuChun 1,2 , DONG XiaoWei 1,2 , PEI Li 1,2 & JIAN ShuiSheng 1,2 1 Key Laboratory of All Optical Network & Advanced Telecommunication Network of EMC, Beijing Jiaotong University, Beijing 100044, China 2 Institute of Lightwave Technology, Beijing Jiaotong University, Beijing 100044, China | 2010 | Science China(Information Sciences)2010，53，5： | 1 |
| 20 | Phase and micmstructure analysis of Cu-Cr-Zr alloys 显示文摘 | Li Huaqing Xie Shuisheng Mi Xujun | 2007 | Journal of Materials Science and TechnologT2007，23，6： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员