|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Kinetics and corrosion products of aqueous nitrate reduction by iron powder without reaction conditions control显示文摘Although considerable research has been conducted on nitrate reduction by zero-valent iron powder (Fe0), these studies were mostly operated under anaerobic conditions with invariable pH that was unsuitable for practical application. Without reaction conditions (dissolved oxygen or reaction pH) control, this work aimed at subjecting the kinetics of denitrification by microscale Fe0 (160–200 mesh) to analysis the factors affecting the denitrification of nitrate and the composition of iron reductive products coating upon the iron surface. Results of the kinetics study have indicated that a higher initial concentration of nitrate would yield a greater reaction rate constant. The reduction rate of nitrate increased with increasing Fe0 dosage. The reaction can be described as a pseudo-first order reaction with respect to nitrate concentration or Fe0 dosage. Experimental results also suggested that nitrate reduction by microscale Fe0 without reaction condition control primarily was an acid-driven surface-mediated process, and the reaction order was 0.65 with respect to hydrogen ion concentration. The analyses of X-ray diffractometry and X-ray photoelectron spectroscopy indicated that a black coating, consisted of Fe2O3, Fe3O4 and FeO(OH), was formed on the surface of iron grains as an iron corrosion product when the system initial pH was lower than 5. The proportion of FeO(OH) increased as reaction time went on, whereas the proportion of Fe3O4 decreased. | FAN Xiaomeng GUAN Xiaohong MA Jun AI Hengyu | 2009 | Journal of Environmental Sciences2009，21，8： | 17 |
| 2 | Effect of pyrolytic carbon interphase on mechanical properties of mini T800-C/SiC composites显示文摘The effect of pyrolytic carbon(PyC) thickness on the tensile property of mini T800 carbon fiber reinforced SiC matrix composites(C/SiC) was studied. PyC interphase was prepared by chemical vapor infiltration(CVI) process using C3H6–Ar as gas source, the PyC thickness was adjusted from 0 to 400 nm, and then the SiC matrix was prepared by CVI process using methyltrichlorosilane(MTS)–H2–Ar as precursor and gas source. The results showed that the tensile strength of mini T800-C/SiC increased first and then decreased with the increase of the PyC thickness. When the thickness of PyC was 100 nm, the average strength reached the maximum value of 393 ± 70 MPa. The Weibull modulus increased from 2.0 to 8.06 with the increase of PyC thickness, and the larger the Weibull modulus, the smaller the dispersion, which indicated that the regulation of PyC thickness was conducive to improve tensile properties. | Donglin Zhao Tong Guo Xiaomeng Fan Chao Chen Yue Ma | 2021 | Journal of Advanced Ceramics2021，10，2： | 6 |
| 3 | Microstructural evolution of carbon fiber reinforced SiC-based matrix composites during laser ablation process显示文摘In this work, four different carbon fiber reinforced SiC-based matrix composites(C/SiC) were prepared,and microstructure evolution during laser ablation process was characterized. Laser irradiation provided a special high-temperature environment up to 3500℃. For all four composites, different morphologies can be obtained in the transition region due to the oxidation of different matrices. While only needle-shaped carbon fiber and nanolayered carbon without any matrix remained in the central region, indicating that graphitization process occurred in the center, resulting from the high-temperature and low-oxygen environment in the laser process. Therefore, the laser ablation of C/SiC composites is controlled by chemical and physical erosion, and mainly by the physical erosion in the center. | Xiaolin Dang Xiaowei Yin Xiaomeng Fan Yuzhao Ma Jiangtao Wang Panfei Ju Hongwei Song | 2019 | Journal of Materials Science & Technology2019，35，12： | 4 |
| 4 | Controllable synthesis of mesoporous carbon hollow microsphere twined by CNT for enhanced microwave absorption performance显示文摘The low dielectric loss of mesoporous carbon hollow microsphere(PCHM)requires high filler loading(higher than 20 wt%)when it is used as microwave absorbers.In order to decrease the filler loading of PCHM,a new strategy for synergistic increase of polarization and conductive loss was developed by twining PCHM with carbon nanotube(CNT)according to theoretic calculation.By the optimization of CNT content,the minimum reflection coefficient was -34.6 dB with a filler loading of only 10 wt%,which was much lower than -2.1 dB of PCHM.In addition,the effective absorption bandwidth was 3.6 GHz at X band with a thickness of 2.8 mm.The enhanced microwave absorption performance can be ascribed to the unique combination of hollow PCHM and one-dimensional CNT with higher graphitization degree,leading to increase of conductivity and heterogeneous interfaces.As a result,the conductive loss increased from 0.12 to 2.27 and polarization loss increased from 0.15 to 0.67,achieving the balance between attenuation ability and impedance match. | Minghang Li Xiaomeng Fan Hailong Xu Fang Ye Jimei Xue Xiaoqiang Li Laifei Cheng | 2020 | Journal of Materials Science & Technology2020，59，24： | 4 |
| 5 | Expert consensus on perioperative management of liver transplantation in adults with acute-on-chronic liver failure显示文摘Acute-on-chronic liver failure(ACLF)is a syndrome in which acute liver failure with extrahepatic organ failure occurs on chronic liver disease.Recently,liver transplantation is the only effective treatment for ACLF.There is still room for discussion on the optimal surgery timing for ACLF,perioperative infection prevention and control,and maintenance of nutrition and organ function.The Transplantation Immu-nology Committee of Branch of Organ Transplantation Physician of Chinese Medical Doctor Association and Enhanced Recovery of Liver Transplantation Group of Enhanced Recovery after Surgery Committee of Chinese Research Hospital Association invited relevant experts to discuss the perioperative management of ACLF liver transplantation in areas including surgery timing,organ protection,nutritional support,infection prevention and control,rehabilitation exercises,regulation of the internal environment,etc.An expert consensus was developed as reference for clinicians. | Transplantation Immunology Committee of Branch of Organ Transplantation Physician of Chinese Medical Doctor Association Enhanced Recovery of Liver Transplantation Group of Enhanced Recovery after Surgery Committee of Chinese Research Hospital Society Guihua Chen Yang Yang Huimin Yi Jianrong Liu Pinglan Lu Lijuan Li Mingming Fan Xiaomeng Yi Haijin Lv Xuxia Wei | 2021 | Liver Research2021，5，2： | 3 |
| 6 | Brain-wide Mapping of Mono-synaptic Afferents to Different Cell Types in the Laterodorsal Tegmentum显示文摘The laterodorsal tegmentum(LDT) is a brain structure involved in distinct behaviors including arousal,reward, and innate fear. How environmental stimuli and top-down control from high-order sensory and limbic cortical areas converge and coordinate in this region to modulate diverse behavioral outputs remains unclear.Using a modified rabies virus, we applied monosynaptic retrograde tracing to the whole brain to examine the LDT cell type specific upstream nuclei. The LDT received very strong midbrain and hindbrain afferents and moderate cortical and hypothalamic innervation but weak connections to the thalamus. The main projection neurons from cortical areas were restricted to the limbic lobe, including the ventral orbital cortex(VO), prelimbic, and cingulate cortices. Although different cell populations received qualitatively similar inputs, primarily via afferents from the periaqueductal gray area, superior colliculus, and the LDT itself, parvalbumin-positive(PV?) GABAergic cells received preferential projections from local LDT neurons.With regard to the different subtypes of GABAergic cells, aconsiderable number of nuclei, including those of the ventral tegmental area, central amygdaloid nucleus, and VO, made significantly greater inputs to somatostatinpositive cells than to PV?cells. Diverse inputs to the LDT on a system-wide level were revealed. | Xiaomeng Wang Hongbin Yang Libiao Pan Sijia Hao Xiaotong Wu Li Zhan Yijun Liu Fan Meng Huifang Lou Ying Shen Shumin Duan Hao Wang | 2019 | Neuroscience Bulletin2019，35，5： | 3 |
| 7 | In-situ growth of MAX phase coatings on carbonised wood and their terahertz shielding properties显示文摘Electromagnetic interference(EMI)shielding materials have received considerable attention in recent years.The EMI shielding effectiveness(SE)of materials depends on not only their composition but also their microstructures.Among various microstructure prototypes,porous structures provide the advantages of low density and high terahertz wave absorption.In this study,by using carbonised wood(CW)as a template,1-mm-thick MAX@CW composites(Ti2AlC@CW,V2A1C@CW,and Cr2AlC@CW)with a porous structure were fabricated through the molten salt method.The MAX@CW composites led to the formation of a conductive network and multilayer interface,which resulted in improved EMI SE.The average EMI SE values of the three MAX@CW composites were>45 dB in the frequency of 0.6-1.6 THz.Among the composites,V2A1C@CW exhibited the highest average EMI SE of 55 dB. | Jiaxuan HUANG Hujie WAN Mian LI Yiming ZHANG Jianfeng ZHU Xuelin LI Wenchao SHUI Yao LI Xiaomeng FAN Qiye WEN Xu XIAO Qing HUANG | 2021 | Journal of Advanced Ceramics2021，10，6： | 2 |
| 8 | Preparation and Spectral Analysis of Gold Nanoparticles Using Magnetron Sputtering and Thermal Annealing显示文摘Gold(Au) nanoparticles were prepared on Au-fi lm-coated K9 glass and silicon substrates by direct current(DC) magnetron sputtering and thermal annealing treatment. The effects of substrate material, annealing temperature, and time on morphologies of Au nanoparticles were investigated, and the formation mechanism of Au nanoparticles was discussed. The experimental results indicate that silicon substrate is more suitable for the formation of Au nanoparticles. On a silicon substrate, Au nanoparticles formed with good spherical shapes at temperature over 700 ℃. It was also found by spectral analysis that the fi eld enhancement factor of the island-shaped Au particles was smaller than that of the granular Au particles; the better the spherical shape as well as the smaller the size and spacing of Au particles, the higher the light absorption rate; the absorption peak had a red shift with increasing particle size and spacing. | 李保家 HUANG Lijing 周明 FAN Xiaomeng MA Ming | 2014 | Journal of Wuhan University of Technology(Materials Science)2014，29，4： | 2 |
| 9 | Post-synthesis and structural evolution of hollow titanium silicalite-1 with solvent-free method显示文摘Generating hollow structure inside titanium silicalite-1(TS-1)is a widely used method to improve its liquid-phase oxidation catalytic performance in industry.However,traditional dissolution-recrystallization method usually required a large amount of aqueous solution of organic template,leading to unfavorable polluted waste,low production efficiency,and high manufacture cost.Here,a facile and environmental friendly strategy was proposed for the post-synthesis of hollow TS-1 zeolite with a solventfree method utilizing NH4HCO3 and tetrapropylammounium bromide as selective etching agents,which reduced the usage of organic template and avoided the liquid waste.The high crystallinity,the microporous structure,and the active Ti sites were preserved at a high product yield(>93%).The formation mechanism of hollow structure was also investigated by exploring effects of different reactants and experimental parameters.Meanwhile,the obtained hollow TS-1 showed an outstanding performance in the epoxidation of 1-hexene in comparison to the parent zeolite. | Yaqi Fan Xianchen Gong Xiaomeng Si Changjiu Xia Peng Wu Yanhang Ma | 2023 | Nano Research2023，16，1： | 1 |
| 10 | Electromagnetic interference shielding Ti3C2Tx-bonded carbon black films with enhanced absorption performance显示文摘The demand for flexible and freestanding electromagnetic interference(EMI)shielding materials are more and more urgent to combat with serious electromagnetic(EM)radiation pollution.Twodimensional Ti3C2Tx is considered as promising EMI shielding material to graphenes because of the low cost and high electrical conductivity.However,the shielding performance still needs to be optimized to decrease the reflection effectiveness(SER)and increase absorption effectiveness(SEA).Herein,we prepared Ti3C2Tx-bonded carbon black films with a porous structure.The SER decreased from 20 dB to12 dB and the SEA increased from 31 dB to 47 dB.The best EMI shielding effectiveness can be as high as60 dB with SEA of 15 dB and SER of45 dB.Their calculated specific shielding effectiveness can be as high as8718 dB cm^2/g.These results indicate that the porous structure can enhance the absorption of the EMI shielding films,resulting from the enhanced scattering and reflectio n.Conseque ntly,this work provides a promising MXene-based EMI shielding film with lightweight and flexibility. | Xiaomeng Fan Minghang Li Xin Li Fang Ye Jimei Xue Litong Zhang Laifei Cheng | 2020 | Chinese Chemical Letters2020，31，4： | 1 |
| 11 | Friction and wear behaviors of C/C-SiC composites containing Ti3SiC2显示文摘 | Fan Xiaomeng Yin Xiaowei He Shanshan | 2012 | Wear2012，，27： | 1 |
| 12 | Failure behavior of interfacial domain in SiC-matrix based composites显示文摘In this work,the microstructure,failure behavior and interfacial properties with respective to the interfacial domain in SiCf/BN/SiC and C_(f)/PyC/SiC composites were studied via the fiber push-in test.The differences in the mechanical response of the interfacial domain were observed.During the fiber push-in test for SiCf/BN/SiC,the interface debonding accompanied with interphase fracture occurred,resulting in an obvious sign of the onset of debonding on loading-displacement(P-u)curves.While the good continuity of P-u curves can be observed for Cf/PyC/SiC,which is due to that the failure is in the form of interface debonding along with interphase lateral slipping caused by the extension of buckled carbon fiber,without any interphase fracture.The interfacial properties calculated from the fiber push-in test show that Cf/PyC/SiC possesses a weaker interfacial domain compared with SiC_(f)/BN/SiC.The interfacial shear stress of SiCf/BN/SiC and C_(f)/PyC/SiC composites amounts 94.2 and 48.1 MPa,respectively. | Jinxue Ding Xiaokang Ma Xiaomeng Fan Jimei Xue Fang Ye Laifei Cheng | 2021 | Journal of Materials Science & Technology2021，，29： | 1 |
| 13 | Oxidation behaviors of carbon fiber reinforced multilayer SiC–Si_(3)N_(4) matrix composites显示文摘Oxidation behaviors of carbon fiber reinforced SiC matrix composites(C/SiC)are one of the most noteworthy properties.For C/SiC,the oxidation behavior was controlled by matrix microcracks caused by the mismatch of coefficients of thermal expansion(CTEs)and elastic modulus between carbon fiber and SiC matrix.In order to improve the oxidation resistance,multilayer SiC–Si_(3)N_(4) matrices were fabricated by chemical vapor infiltration(CVI)to alleviate the above two kinds of mismatch and change the local stress distribution.For the oxidation of C/SiC with multilayer matrices,matrix microcracks would be deflected at the transition layer between different layers of multilayer SiC–Si_(3)N_(4) matrix to lengthen the oxygen diffusion channels,thereby improving the oxidation resistance of C/SiC,especially at 800 and 1000℃.The strength retention ratio was increased from 61.9%(C/SiC–SiC/SiC)to 75.7%(C/SiC–Si_(3)N_(4)/SiC/SiC)and 67.8%(C/SiC–SiC/Si_(3)N_(4)/SiC)after oxidation at 800℃for 10 h. | Xiaolin DANG Donglin ZHAO Tong GUO Xiaomeng FAN Jimei XUE Fang YE Yongsheng LIU Laifei CHENG | 2022 | Journal of Advanced Ceramics2022，11，2： | 1 |
| 14 | Friction andwear behaviors of C/C-SiC composites containing Ti3SiC2 显示文摘 | Fan Xiaomeng Yin Xiaowei He Shanshan | 2012 | Wear2012，，： | 1 |
| 15 | A new route to fabricate SiB4 modified C/SiC composites 显示文摘 | Shi Fengming Yin Xiaowei Fan Xiaomeng | 2010 | Journal of the European Ceramic Society2010，，30： | 1 |
| 16 | Queues! Queues! When to pass?显示文摘In today's world, traveling by plane is very common. In choosing an airport, passengers usually take two aspects into account: security and the time they spend waiting in line. There is a tension between desires to maximize security while minimizing inconvenience to passengers. In order to solve this problem, our team conduct the study. | Yue Yin Xiaomeng Fan Jiahui Ni | 2017 | 科技经济导刊2017，，14： | 0 |
| 17 | Application of nano-patterned InGaN fabricated by selfassembled Ni nano-masks in green InGaN/GaN multiple quantum wells显示文摘The nano-patterned InGaN film was used in green InGaN/GaN multiple quantum wells(MQWs)structure,to relieve the unpleasantly existing mismatch between high indium content InGaN and GaN,as well as to enhance the light output.The different self-assembled nano-masks were formed on InGaN by annealing thin Ni layers of different thicknesses.Whereafter,the InGaN films were etched into nano-patterned films.Compared with the green MQWs structure grown on untreated InGaN film,which on nano-patterned InGaN had better luminous performance.Among them the MQWs performed best when 3 nm thick Ni film was used as mask,because that optimally balanced the effects of nano-patterned InGaN on the crystal quality and the light output. | Ruoshi Peng Shengrui Xu Xiaomeng Fan Hongchang Tao Huake Su Yuan Gao Jincheng Zhang Yue Hao | 2023 | Journal of Semiconductors2023，44，4： | 0 |
| 18 | Co-aromatization of methane and hexane over Pt encapsulated in ZSM-5 zeolite and the electronic effect of K promoters显示文摘The co-aromatization of methane with higher hydrocarbons represents a promising route to valorize methane, an abundant but underexploited carbon resource. In this study, we elucidate a novel approach to enhance the catalytic co-aromatization of hexane and methane by confining Pt within zeolite catalysts and modulating its electron density. Our findings show that encapsulating Pt within MFI structure is pivotal for activating the feedstock and fostering the formation of aromatic products. Interaction between K atoms and the silanol nest forms siloxy groups which are critical for the stabilization of Pt species. Tuning the K content in PtSn@MFI catalysts adeptly alters the electronic configuration of Pt clusters. This modification is corroborated by infrared and X-ray photoelectron spectroscopy analysis, and density functional theory calculations. Remarkably, the catalyst with 0.8 wt% K exhibits an optimal Pt electron density, driving its superior efficacy in the co-aromatization reaction, converting 0.78 mol of methane for each mole of hexane processed. By employing ~(13)C isotopic labeling and solid-state NMR studies, we demonstrate the participation of methane in the adsorbed species inside the zeolite channel and its incorporation to the benzyl site of the substitute group and phenyl rings in aromatic compounds, underscoring the importance of Pt encapsulation. | Bei Liu Fan Wang Xiaomeng Dou Pengfei Li Hongwei Xiang Yong Yang Peng He | 2024 | Science China Chemistry2024，67，3： | 0 |
| 19 | Evolution of microstructure and electromagnetic interference shielding performance during the ZrC precursor thermal decomposition process显示文摘A polymer-derived ZrC ceramic with excellent electromagnetic interference(EMI)shielding performance was developed to meet ultra-high temperature requirements.The thermal decomposition process of ZrC organic precursor was studied to reveal the evolution of phase composition,microstructure,and EMI shielding performance.Furthermore,the carbothermal reduction reaction occurred at 1300℃,and the transition from ZrO_(2) to ZrC was completed at 1700℃.With the increase in the annealing temperature,the tetragonal zirconia gradually transformed into monoclinic zirconia,and the transition was completed at the annealing temperature of 1500℃ due to the consumption of a large amount of the carbon phase.The average total shielding effectiveness values were 11.63,22.67,22.91,22.81,and 34.73 dB when the polymerderived ZrC was annealed at 900,1100,1300,1500,and 1700℃,respectively.During the thermal decomposition process,the graphitization degree and phase distribution of free carbon played a dominant role in the shielding performance.The typical core–shell structure composed of carbon and ZrC can be formed at the annealing temperature of 1700℃,which results in excellent shielding performance. | Zeli Jia Xiaomeng Fan Jiangyi He Jimei Xue Fang Ye Laifei Cheng | 2023 | International Journal of Minerals,Metallurgy and Materials2023，30，7： | 0 |
| 20 | Gradient carbonyl-iron/carbon-fiber reinforced composite metamaterial for ultra-broadband electromagnetic wave absorption by multi-scale integrated design显示文摘The demand of high-end electromagnetic wave absorbing materials puts forward higher requirements on comprehensive performances of small thickness,lightweight,broadband,and strong absorption.Herein,a novel multi-layer stepped metamaterial absorber with gradient electromagnetic properties is proposed.The complex permittivity and permeability of each layer are tailored via the proportion of carbonyliron and carbon-fiber dispersing into the epoxy resin.The proposed metamaterial is further optimized via adjusting the electromagnetic parameters and geometric sizes of each layer.Comparing with the four-layer composite with gradient electromagnetic properties which could only realize reflection loss(RL)of less than−6 dB in 2.0-40 GHz,the optimized stepped metamaterial with the same thickness and electromagnetic properties realizes less than−10 dB in the relevant frequency range.Additionally,the RL of less than−15 dB is achieved in the frequency range of 11.2-21.4 GHz and 28.5-40 GHz.The multiple electromagnetic wave absorption mechanism is discussed based on the experimental and simulation results,which is believed to be attributed to the synergy effect induced by multi-scale structures of the metamaterial.Therefore,combining multi-layer structures and periodic stepped structures into a novel gradient absorbing metamaterial would give new insights into designing microwave absorption devices for broadband electromagnetic protections. | Qian Zhou Tiantian Shi Bei Xue Shengyue Gu Wei Ren Fang Ye Xiaomeng Fan Wenyan Duan Zihan Zhang Lifei Du | 2023 | International Journal of Minerals,Metallurgy and Materials2023，30，6： | 0 |
您所在的机构暂未开通此部分的功能，请联系管理员