|
|
|
题名
|
作者
|
年代
|
出处
|
被引量
|
| 1 | Coalbed methane genesis, occurrence and accumulation in China显示文摘Coalbed methane (CBM) is an important type of unconventional gas. Commercial development of CBM in America has been very successful since the 1980s. The CBM industry in Australia and Canada has developed rapidly during the last decade. Commercial development of CBM in China started in the 1990s, and has made great progress. The geological theory of CBM in China has achieved great advancement in genesis, occurrence and accumulation. On the aspect of CBM genesis, five CBM genetic types (primary biogenic gas, secondary biogenic gas, thermal degradation gas, pyrolysis gas and mixed gas) are identified by studying the geochemical characteristics of CBM, and a tracing indicator system is established. The discovery of secondary biogenic gas in medium-high rank coal reservoirs has widened the potential of CBM resources. On the aspect of CBM occurrence, the gas adsorption regulation under combined action of temperature and pressure is revealed by conducting adsorption experiments of different coal ranks under varying temperature and pressure conditions. Besides, by applying the adsorption potential theory in CBM research, the adsorption model under combined action of temperature and pressure is established. The new model can predict CBM resources accurately, and overcome the limitation of the traditional Langmuir model which uses just a single factor to describe the adsorption characteristics of deep buried coal. On the aspect of CBM accumulation, it is proposed that there are three evolutionary stages during CBM accumulation, including gas generation and adsorption, unsaturated gas adsorption, gas desorption-diffusion and preservation. Controlled by tectonic evolution, hydrodynamics and sealing conditions, CBM tends to be regionally enriched in synclines. Advances in geological theory of CBM in China can not only improve understanding of natural gas, but also provide new ideas for further exploration of CBM. | Song Yan Liu Shaobo Zhang Qun Tao Mingxin Zhao Mengjun Hong Feng | 2012 | Petroleum Science2012，9，3： | 29 |
| 2 | Origin and evolution of waters in the Hancheng coal seams,the Ordos Basin,as revealed from water chemistry and isotope(H,O,^(129)I) analyses显示文摘The coal seams in the Permian Taiyuan Formation and the Carboniferous Shanxi Formation are the primary reservoirs for the coalbed methane(CBM)in the Hancheng region in the Ordos Basin.In this paper,the origin and evolution of waters associated with CBM production were studied on the basis of water chemistry and isotopes including the chloride and iodine compositions,oxygen and hydrogen stable isotopes,and radioactive isotope ratio of129I/127I.The ratio of129I/127I of water was determined by accelerator mass spectrometry(AMS).The result shows that the formation water is of NaHCO3and NaCl types with the total dissolved solids(TDS)varying from 1532.29 mg/L to 7061.12 mg/L.The values of129I and I/Cl ratio indicate that the formation waters were diluted by meteoric water.The129I/127I ratios range from 6.6×10 13to 1459.5×10 13.The129I/127I ratios for most of the samples are between the129I/127I initial value and that of recent anthropogenic water.This age of the formation water samples,obtained through the129I decay curve method,ranges from 0 Ma to 18.5 Ma,suggesting that the waters from the Taiyuan Formation and the Shanxi Formation are very young.Two different origins of water are identified in the Hancheng region.One group is dominated by pre-anthropogenic meteoric water,and is characterized by129I/127I ratios lower than the initial value of 15×10 13andδD,δ18O values of waters below the Global Meteoric Water Line.The other group is characterized by129I/127I ratios in excess of 15×10 13,which has undergone variable degrees of dilution by recent anthropogenic water. | MA XingZhi SONG Yan LIU ShaoBo JIANG Lin HONG Feng | 2013 | Science China Earth Sciences2013，56，11： | 8 |
| 3 | Whole-genome sequencing provides insights into the genetic diversity and domestication of bitter gourd(Momordica spp.)显示文摘Bitter gourd(Momordica charantia)is a popular cultivated vegetable in Asian and African countries.To reveal the characteristics of the genomic structure,evolutionary trajectory,and genetic basis underlying the domestication of bitter gourd,we performed whole-genome sequencing of the cultivar Dali-11 and the wild small-fruited line TR and resequencing of 187 bitter gourd germplasms from 16 countries.The major gene clusters(Bi clusters)for the biosynthesis of cucurbitane triterpenoids,which confer a bitter taste,are highly conserved in cucumber,melon,and watermelon.Comparative analysis among cucurbit genomes revealed that the Bi cluster involved in cucurbitane triterpenoid biosynthesis is absent in bitter gourd.Phylogenetic analysis revealed that the TR group,including 21 bitter gourd germplasms,may belong to a new species or subspecies independent from M.charantia.Furthermore,we found that the remaining 166 M.charantia germplasms are geographically differentiated,and we identified 710,412,and 290 candidate domestication genes in the South Asia,Southeast Asia,and China populations,respectively.This study provides new insights into bitter gourd genetic diversity and domestication and will facilitate the future genomics-enabled improvement of bitter gourd. | Junjie Cui Yan Yang Shaobo Luo Le Wang Rukui Huang Qingfang Wen Xiaoxia Han Nansheng Miao Jiaowen Cheng Ziji Liu Changyuan Zhang Chengcheng Feng Haisheng Zhu Jianwen Su Xinjian Wan Fang Hu Yu Niu Xiaoming Zheng Yulan Yang Dai Shan Zhensheng Dong Weiming He Narinder P.S.Dhillon Kailin Hu | 2020 | Horticulture Research2020，7，1： | 7 |
| 4 | Interfacial microstructure evolution and bonding mechanisms of 14YWT alloys produced by hot compression bonding显示文摘Hot compression bonding was first used to join oxide-dispersion-strengthened ferrite steels(14 YWT)under temperatures of 750–1100℃ with a true strain range of 0.11–0.51. Subsequently, the microstructure evolution and mechanical properties of the joints were characterized, revealing that the 14 YWT steels could be successfully bonded at a temperature of at least 950℃ with a true strain of 0.22, without degrading the fine grain and nanoparticle distribution, and the presence of inclusions or micro-voids along the bonding interface. Moreover, the joints had nearly the same tensile properties at room temperature and exhibited a similar fracture morphology with sufficient dimples compared to that of the base material. An electron backscattered diffraction technique and transmission electron microscopy were systematically employed to study the evolution of hot deformed microstructures. The results showed that continuous dynamic recrystallization characterized by progressive subgrain rotation occurred in this alloy, but discontinuous dynamic recrystallization characterized by strain-induced grain boundary bulging and subsequent bridging sub-boundary rotation was the dominant nucleation mechanism. The nuclei will grow with ongoing deformation, which will contribute to the healing of the original bonding interface. | Liying Zhou Shaobo Feng Mingyue Sun Bin Xu Dianzhong Li | 2019 | Journal of Materials Science & Technology2019，35，8： | 6 |
| 5 | Oil and Gas Accumulation in the Foreland Basins,Central and Western China显示文摘低岬盆在中央、西方的中国代表最重要的烃产地之一。区分这些低岬盆地区性,并且根据石油探索和有利探索区域的需要,在中央、西方的中国的低岬盆能被划分成三种结构的类型:附加、倒退、起改革作用的低岬盆(或戳带),有在他们的石油系统部件的特殊石油系统特征的各个(例如来源岩石,水库岩石, caprock ,油的时间和煤气的累积,在累积以后的油/气体水库的 remolding ,并且有利探索区域,等等)。附加类型低岬盆由 Tarim 盆的 Kuqa 消沉例示由早、迟了的低岬盆开发的二个阶段描绘了,典型地包含至少二张烃来源床,一个人在以后的差错马槽湖阶段在早低岬发展和另外一个扔了。在这类低岬盆的烃累积经常发生在盆发展的多重阶段,尽管大多数高度高效的水池在烃移植和陷阱(喜玛拉雅的时期) 的迟了的阶段期间被形成。这在到倒退的低岬盆的鲜明对比(仅仅开发低岬盆在期间对二叠三叠纪) 例如西方的四川盆,在丰富的烃来源岩石与沉积在低岬盆发展的早阶段期间扔了被联系的地方。作为结果,在倒退的低岬盆的烃累积主要在盆进化的早阶段发生。起改革作用的低岬盆(仅仅在喜玛拉雅的时期期间开发低岬盆)相反,包含仅仅在在迟了的新生代期间发生在起改革作用的低岬发展以前的差错马槽湖盆扔的器官富人的、湖的来源岩石例如北 Qaidam 盆,与晚相对发生的烃累积(喜玛拉雅的时期)。因此,在低岬盆的三种类型的最终的烃潜力被程度大部分决定空间、时间在戳带,烃来源厨房,和地区性、本地的 caprocks 之中匹配。 | SONG Yan ZHAO Menjun LIU Shaobo HONG Feng FANG Shihu | 2010 | Acta Geologica Sinica(English Edition)2010，84，2： | 5 |
| 6 | Pool-Forming Stages and Enrichment Models of Medium- to High-Rank Coalbed Methane显示文摘coalbed 甲烷的形成水池的机制有它的自己的特征。在这份报纸,基于在中国的典型的忍受煤的盆上的研究,这被指出媒介的水库形成 -- 到高等级的 coalbed,甲烷经历了三个批评阶段:coalbed 甲烷产生和吸附阶段和保藏舞台。地区性的构造进化,水动力学条件和封上的条件在 coalbed 甲烷解吸附作用散开和保藏的阶段起重要作用。中等 -- 到高等级的 coalbed,甲烷有丰富模型的三种类型,也就是说最有利,相对有利,并且相反的丰富模型。 | SONG Yan ZHAO Mengjun HONG Feng LIU Shaobo QIN Shengfei WANG Hongyan | 2010 | Acta Geologica Sinica(English Edition)2010，84，6： | 4 |
| 7 | Mechanism of Gravity Effect on Solidification Microstructure of Eutectic Alloy显示文摘The influence of gravity on the solidification microstructure of Al-AI_3Ni eutectic alloy was investigated by using a 50-m-long drop tube.It was found that at different growth rates the average inter-rod spacing was always larger under microgravity(μg)than those under normal gravity(1g).Moreover,with increasing growth rate,the spacing difference between 1 g samples andμg samples reduced progressively.Based on the experimental results and analysis,a physical model was proposed to describe the effect of gravity on the solidification process of eutectic alloy. | Nannan Zhang Xinghong Luo Shaobo Feng Yuhu Ren | 2014 | Journal of Materials Science & Technology2014，30，5： | 3 |
| 8 | Fast assignment reduction in inconsistent incomplete decision systems显示文摘This paper focuses on fast algorithm for computing the assignment reduct in inconsistent incomplete decision systems. It is quite inconvenient to judge the assignment reduct directly according to its definition. We propose the judgment theorem for the assignment reduct in the inconsistent incomplete decision system, which greatly simplifies judging this type reduct. On such basis, we derive a novel attribute significance measure and construct the fast assignment reduction algorithm(FARA), intended for computing the assignment reduct in inconsistent incomplete decision systems. Finally, we make a comparison between FARA and the discernibility matrixbased method by experiments on 13 University of California at Irvine(UCI) datasets, and the experimental results prove that FARA is efficient and feasible. | Min Li Shaobo Deng Shengzhong Feng Jianping Fan | 2014 | Journal of Systems Engineering and Electronics2014，25，1： | 3 |
| 9 | Polycrystalline diamond MESFETs by Au-mask technology for RF applications显示文摘Metal-semiconductor field effect transistors (MESFETs) were fabricated on H-terminated polycrystalline diamond.The DC characteristics of the p-channel MESFET showed a maximum drain current density of 204 mA/mm at a gate-source voltage of 6 V,and a maximum transconductance of 20 mS/mm at a gate-source voltage of 1.5 V.The small signal S-parameters of MESFET with 2 100 m gate width and 2 m gate length were measured.An extrinsic cut-off frequency (fT) of 1.7 GHz and the maximum oscillation frequency (fmax) of 2.5 GHz were obtained,which was the first report on diamond MESFETs with RF characteristics in China. | FENG ZhiHong WANG JingJing HE ZeZhao DUN ShaoBo YU Cui LIU JinLong ZHANG PingWei GUO Hui LI ChengMing CAI ShuJun | 2013 | Science China(Technological Sciences)2013，56，4： | 2 |
| 10 | The key stage and moment of coalbed gas reservior evolution in the Qinshui Basin,China显示文摘The evolution of coalbed gas reservoir is characterized by coalbed gas geochemistry and gas content. On the basis of burial history and thermal history, the forming process of coalbed gas reservoir and the gas accumulative history in the Qinshui Basin are discussed in this paper. The difference of the thermal history, geochemistry characteristic, and gas accumulative history between Yangcheng and Huozhou areas shows that the formation of coalbed gas reservoir in the Qinshui Basin is controlled by the geological process in the critical stage and the critical moment. The components and isotopes of coalbed methane are determined by the stage at which the coal maturation reaches its maximum rank. The coalbed methane accumulative history is related to the temperature and pressure of the coal burial history, because the coalbed gas is mainly in adsorptive state. It is stated that the gas content in the coal seam is controlled by the moment when the coal seam is uplifted to the shallowest position. | ZHAO Mengjun SONG Yan SU Xianbo LIU Shaobo QIN Shengfei HONG Feng LIN Xiaoying | 2005 | Chinese Science Bulletin2005，50，S1： | 2 |
| 11 | Reservoir Porosity Measurement Uncertainty and its Influence on Shale Gas Resource Assessment显示文摘Reservoir porosity is a critical parameter for the process of unconventional oil and gas resources assessment. It is difficult to determine the porosity of a gas shale reservoir, and any large deviation will directly reduce the credibility of any shale gas resources evaluation. However, there is no quantitative explanation for the accuracy of porosity measurement. In this paper, measurement uncertainty, an internationally recognized index, was used to evaluate the results of porosity measurement of gas shale plugs, and its impact on the credibility of shale gas resources assessment was determined. The following conclusions are drawn:(1) the measurement uncertainty of porosity of a shale plug is 1.76%–3.12% using current measurement methods, the upper end of which is too large to be acceptable. It is suggested that the measurement uncertainty should be factored into the standard helium gas injection porosity determination experiment, and the uncertainty should be less than 2.00% when using a high-precision pressure gauge;(2) in order to reduce the risk for exploration and decision-making, attention should be paid to the large uncertainty(30% at least) of shale gas resource assessment results, sometimes with corrections being made based on the practical considerations;(3) a pressure gauge with an accuracy of 0.25% of the full scal cannot meet the requirements of porosity measurement, and a high-precision plug cutting method or high-precision bulk volume measurement method such as one using 3 D scanning, is recommended to effectively reduce porosity uncertainty;(4) the method and process for evaluating the measurement uncertainty of gas shale porosity could also be referred for assessment of experimental quality by other laboratories. | TIAN Hua ZOU Caineng LIU Shaobo HONG Feng FAN Junjia GUI Lili HAO Jiaqing | 2020 | Acta Geologica Sinica(English Edition)2020，94，2： | 2 |
| 12 | Accumulation conditions and key technologies for exploration and development of Qinshui coalbed methane field显示文摘The Qinshui Basin has been explored for more than 60 years through two stages of oil and gas reconnaissance survey and exploration&development of coalbed methane(CBM),it has become the largest CBM industrialization base in China and also is a model which successfully realize commercialization of CBM of high rank coal-bearing basin in the world.Although the high-rank coal field is characterized by low pressure,low permeability,low saturation and strong heterogeneity,the exploration practice and research show that the accumulation conditions of CBM reservoir in the Qinshui Basin are superior.As main productive intervals,No.15 coal seam of Taiyuan Formation and No.3 coal seam of Shanxi Formation respectively belong to the epicontinental-sea carbonate platform sedimentary system and the epicontinental-sea shallow-water delta sedimentary system.The coal seam has large thickness,and is mostly composed of humic coal and mainly contains vitrinite.Affected by tectonic thermal events in the Yanshanian period,the coal rank is high,the adsorption capacity is strong,and the gas content is large.Formation of the CBM reservoir goes through three stages including two stages of hydrocarbon generation,gas phase transformation and sealing of hydrodynamics and roof and floor.In view of the characteristics of the Qinshui Basin topography and the high rank coal,a series of key technologies for exploration and development are developed,including mountainous region seismic acquisition,processing and interpretation technology,drilling and completion technology of multiple wells,drilling and completion technology of multiple horizontal wells dominated by compound V type,deplugging secondary fracturing stimulation technology,control technology of high rank CBM drainage,and CBM gathering and transportation technology,which effectively supports the scale and industrialization development of high rank CBM in the Qinshui Basin. | Yan Song Xingzhi Ma Shaobo Liu Lin Jiang Feng Hong Yi Qin | 2018 | Petroleum Research2018，3，4： | 1 |
| 13 | W-band GaN MMIC PA with 257 mW output power at 86.5 GHz Project supported by the National Natural Science Foundation of China (No. 61306113).显示文摘 | Xu Peng Song Xubo Lü Yuanjie Wang Yuangang Dun Shaobo Yin Jiayun Fang Yulong Gu Guodong Feng Zhihong Cai Shujun | 2015 | Journal of Semiconductors2015，，8： | 1 |
| 14 | Favorable Depth Distribution of Coalbed Methane Enrichment and High Yield Zone in Slope Areas显示文摘Objective More than 60%of China’s coalbed methane(CBM)resources are distributed in medium-high rank coalbearing basins.Exploration practices have confirmed that the medium-high rank CBM enrichment and high yield zones are mainly distributed in the slope areas of coal basins and are significantly jointly controlled by gas content and permeability of coal seams.They have an optimal assemblage within a certain depth range。 | SONG Yan LIU Shaobo MA Xingzhi JIANG Lin HONG Feng | 2017 | Acta Geologica Sinica(English Edition)2017，91，1： | 1 |
| 15 | Study on process and model of CBM dissipating显示文摘Coal Bed Methane(CBM) occurs in coal seams in the states of adsorption gas, free gas and water-dissolved gas. Its dissipating starts with desorption, and then it dissipates outwards in the states of free gas and water-dissolved gas. The dissipating approach is classified to three patterns: Free gas in pores dissipates through the cover rocks; hydrocarbon molecules in the cap-rocks and reservoir diffuse because of concentration gradient; gas dissolving in water is directly taken away by water. According to the controlling factors of CBM conservation and considering the cover rocks, soleplate, hydrological region identification and dissipating theory, three geological models of CBM dissipating are built: closed system model, lateral hydrological closed model and open system model. | Feng Hong Yan Song Zhenhong Chen Mengjun Zhao Shaobo Liu Shengfei Qin Guoyou Fu | 2005 | Chinese Science Bulletin2005，50，S1： | 1 |
| 16 | Dynamic recrystallization behavior and interfacial bonding mechanism of 14Cr ferrite steel during hot deformation bonding显示文摘In this study, hot compression bonding was first applied to join 14Cr ferrite steel at temperatures of 950–1200°C and strains of 0.11–0.51 under strain rates of 0.01–30 s^(-1).Subsequently, tensile tests were performed on the joints to evaluate the reliability of the joints formed.Detailed microstructural analyses suggest that two different competing dynamic recrystallization(DRX) mechanisms occur during the bonding process depending on the strain rate, and the joints obtained at different strain rate exhibits distinct healing effect.At a low strain rate(0.01 s^(-1)), continuous DRX occurs, as expected in high-stackingfault-energy materials, and is characterized by the progressive conversion of the sub-boundaries into larger-angle boundaries, which involves very limited grain boundaries migration.In addition, straininduced precipitation(SIP) is sufficient under this condition, further impeding the healing of bonding interface.Hence, the joints obtained at low strain rate fractured at the bonding interface easily.Whereas discontinuous DRX is activated at high strain rates(10 and 30 s^(-1)).Under this condition, the formation of sub-boundaries is severely suppressed, resulting in the piling-up of dislocations and hence the storage of a greater amount of stored energy for nucleation and subsequent nuclei growth via the long-distance grain boundaries migration.Meanwhile, the SIP process is sluggish, making the conditions much more favorable for grain boundaries migration which plays a key role in the healing of the original bonding interface.Thus, the joints can be successfully bonded when a high strain rate is applied, with the joints exhibiting tensile properties similar to that of the base material. | Liying Zhou Wenxiong Chen Shaobo Feng Mingyue Sun Bin Xu Dianzhong Li | 2020 | Journal of Materials Science & Technology2020，36，8： | 1 |
| 17 | Spin-selective corner reflector for retro-reflection and absorption by a circular dichroitic manner显示文摘Recently, we have witnessed an extraordinary spurt in attention toward manipulating electromagnetic waves by metasurfaces. Particularly, tailoring of circular polarization has attracted great amounts of interest in both microwave and optics regimes. Circular dichroism, an exotic chiroptical effect of natural molecules, has aroused discussion about this issue, yet it is still in its infancy. Herein, we initiate circular dichroism followed by controlling spin-selective wavefronts via chiral metasurfaces. An N-shaped chiral resonator loaded with two lumped resistors is proposed as the meta-atom producing an adequate phase gradient. Assisted by the ohmic dissipation of the introduced resistors, the effect of differential absorption provides an auxiliary degree of freedom for developing circularly polarized waves with a designated spin state. A planar corner reflector that can achieve retro-reflection and absorption for right-and left-handed circularly polarized incidence is theoretically simulated and experimentally observed at microwave frequency. Thus, our effort provides an alternative approach to tailoring electromagnetic waves in a circular dichroitic manner and may also find applications in multi-functional systems in optics and microwave regimes. | HE WANG YAO JING YONGFENG LI LINGLING HUANG MAOCHANG FENG QI YUAN JIAFU WANG JIEQIU ZHANG SHAOBO QU | 2021 | Photonics Research2021，9，5： | 1 |
| 18 | Allometric models for aboveground biomass of six common subtropical shrubs and small trees显示文摘The aboveground biomass(AGB)of shrubs and small trees is the main component for the productivity and carbon storage of understory vegetation in subtropical secondary forests.However,few allometric models exist to accurately evaluate understory biomass.To estimate the AGB of five common shrub(diameter at base<5 cm,<5 m high)and one small tree species(<8 m high,trees’s seedling),206 individuals were harvested and species-specific and multi-species allometric models developed based on four predictors,height(H),stem diameter(D),crown area(Ca),and wood density(ρ).As expected,the six species possessed greater biomass in their stems compared with branches,with the lowest biomass in the leaves.Species-specific allometric models that employed stem diameter and the combined variables of D~2H andρDH as predictors accurately estimated the components and total AGB,with R^(2) values from 0.602 and 0.971.A multi-species shrub allometric model revealed that wood density×diameter×height(ρDH)was the best predictor,with R^(2) values ranging from between 0.81 and 0.89 for the components and total AGB,respectively.These results indicated that height(H)and diameter(D)were effective predictors for the models to estimate the AGB of the six species,and the introduction of wood density(ρ)improved their accuracy.The optimal models selected in this study could be applied to estimate the biomass of shrubs and small trees in subtropical regions. | Cheng Huang Chun Feng Yuhua Ma Hua Liu Zhaocheng Wang Shaobo Yang Wenjing Wang Songling Fu Han Y.H.Chen | 2022 | Journal of Forestry Research2022，33，4： | 1 |
| 19 | Acellular nerve grafts supplemented with induced pluripotent stem cell-derived exosomes promote peripheral nerve reconstruction and motor function recovery显示文摘Peripheral nerve injury is a great challenge in clinical work due to the restricted repair gap and weak regrowth ability.Herein,we selected induced pluripotent stem cells(iPSCs)derived exosomes to supplement acellular nerve grafts(ANGs)with the aim of restoring long-distance peripheral nerve defects.Human fibroblasts were reprogrammed into iPSCs through non-integrating transduction of Oct3/4,Sox2,Klf4,and c-Myc.The obtained iPSCs had highly active alkaline phosphatase expression and expressed Oct4,SSEA4,Nanog,Sox2,which also differentiated into all three germ layers in vivo and differentiated into mature peripheral neurons and Schwann cells(SCs)in vitro.After isolation and biological characteristics of iPSCs-derived exosomes,we found that numerous PKH26-labeled exosomes were internalized inside SCs through endocytotic pathway and exhibited a proliferative effect on SCs that were involved in the process of axonal regeneration and remyelination.After that,we prepared ANGs via optimized chemical extracted process to bridge 15 mm long-distance peripheral nerve gaps in rats.Owing to the promotion of iPSCs-derived exosomes,satisfactory regenerative outcomes were achieved including gait behavior analysis,electrophysiological assessment,and morphological analysis of regenerated nerves.Especially,motor function was restored with comparable to those achieved with nerve autografts and there were no significant differences in the fiber diameter and area of reinnervated muscle fibers.Taken together,our combined use of iPSCs-derived exosomes with ANGs demonstrates good promise to restore long-distance peripheral nerve defects,and thus represents a cell-free strategy for future clinical applications. | Jianfeng Pan Meng Zhao Xiangjiao Yi Jianguo Tao Shaobo Li Zengxin Jiang Biao Cheng Hengfeng Yuan Feng Zhang | 2022 | Bioactive Materials2022，7，9： | 1 |
| 20 | Interface and ionic interdiffusion in cofired ferroelectric / ferrite multilayer composites显示文摘 | Gao Feng Qu Shaobo Yang Zupei | 2002 | J Mater Sci Lett2002，21，1： | 1 |
您所在的机构暂未开通此部分的功能，请联系管理员